Re: Ethernet/token ring problem

"But the local ethernet devices can't get ping either card."

The local ethernet devices should be able to ping the
Server at 150.150.11.100.  If your local network can't
see the server, you have something set up wrong.

Are you sure you are under the write network masks?
Are they both (the NT sever and the local network) netmasked
to, say, 255.255.255.0 ???

If you can't ping the 150.150.11.100 from a 150.150.11.x that
is your problem.  You need to resolve that before you can even
think about the routing portion.

Regards,

Jim Langston


"Kathreen M. Kruse" wrote:

> <SNIP>
> 4  -  NT 4.0         Token-ring (IP 150.150.10.102)
>       Server         Ethernet   (IP 150.150.11.100)
>
> <SNIP>
> The problem is in step 4.  We are not able to get the NTSERVER to route
> between the Token-ring and Ethernet cards.  The 400 on the token-ring
> pings both cards OK.  But the local ethernet devices can't get ping
> either card.
>
> Can anyone suggest what approach to take?
>
> Thanks
>
> Kat Kruse
> kat_k@sasscominc.com
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---