× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.





How do I work  out the paramaters for RUNRMTCMD


                                                                  
 (Embedded                                                        
 image moved   Rob Berendt <rob@dekko.com>                        
 to file:      05/10/99 20:03                                     
 pic31696.pcx)                                                    
                                                                  



Please respond to MIDRANGE-L@midrange.com

To:   MIDRANGE-L@midrange.com
cc:    (bcc: Nick Runnalls/BCTL/BurmahCastrol)
Subject:  Re: STRPCO




Been awhile since I've used STRPCO.  I use RUNRMTCMD most of the time now.
With RUNRMTCMD the command does not have to be initiated from the PC that you
want to run on.  In our case we poll a shop floor PC for info.  With RUNRMTCMD
I don't have to tell the shop floor person to press a button.  STRPCO might be
nice if you are going to run it from an interactive session and you don't know
which PC.




RBoucher@stanpac.com on 10/05/99 01:10:49 PM
Please respond to MIDRANGE-L@midrange.com@Internet
To:  MIDRANGE-L@midrange.com@Internet
cc:
Fax to:
Subject:  STRPCO

I was looking for a initiate from the AS/400 a PC command (in this case a
Client Access data transfer (.tto)) on the users PC.  Then I stumbled onto
the STRPCO command which can be used in conjunction with STRPCCMD.  It works
like a charm and doesn't involve as many steps as the CWBRXD stuff.  IBM
tells me STRPCO is old stuff and no one uses it anymore since CWBRXD and
RUNRMTCMD.  I just wanted to ask you learned folks why that would be, and
are there any drawbacks to using STRPCO?

Thanks for your help.

Roger Boucher
Standard Pacific Corp.
rboucher@stanpac.com
714-668-4326

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

pic31696.pcx


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.