Re: rack cfg

Thanks Rob
I knew it existed once upon a time.  There oughta be a law....
Thanks

Rob Berendt wrote:
> 
> IBM, in some sick moment, moved this from wrkhdwprd.  Now you have to go
> into STRSST
>         Start a service tool
>         Hardware service manager
>         Press F6 to print.
> Don't worry, it gets worse.  When you start going to the newer, higher
> capacity 1/4" tape drives they call all the models 63A0 to deprive you
> the ability to tell the density supported, or to allow hardware to know
> what kind of replacement to bring, without a physical inspection.
> 
> wayne@redoaktech.com on 08/13/99 11:28:59 AM
> Please respond to MIDRANGE-L@midrange.com@Internet
> To:     MIDRANGE-L@midrange.com@Internet
> cc:
> Fax to:
> Subject:        rack cfg
> 
> Does anyone remember the V3R6 or V3R7 command to print the rack
> configuration?  For the life of me I can't remember the spelling?
> Thanks
> --
> ______________________________________
> Wayne W. Capwell
> Red Oak Technologies, Inc.
> 11301 Carmel Commons Blvd., Suite 114
> Charlotte, NC  28226
> 704-945-1067
> 
> Manufacturing...Production...Solutions
>      http://www.redoaktech.com/
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

-- 
______________________________________
Wayne W. Capwell
Red Oak Technologies, Inc.
11301 Carmel Commons Blvd., Suite 114   
Charlotte, NC  28226
704-945-1067

Manufacturing...Production...Solutions
     http://www.redoaktech.com/
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---