• Subject: RE: Fax Via Ethernet to As400 outq
  • From: Chris Bipes <ChrisB@xxxxxxxxxxxxxxx>
  • Date: Thu, 1 Jul 1999 10:41:50 -0700

We use FASTFAX and were given PC drivers to print with from the PCs.  These
drivers automatically put the spool file into the out queue that FASTFAX
monitors.  Does FAXSTAR have an equivalent driver for your PCs?  They should
provide documentation for that.  Printing to an AS400 IPDS or SCS printer
and placing into FAXSTARs out queue should also work, but you need the PC
drivers that come with CA400 for that.  How are you attached to the AS400?
CA400 or some other product?

Christopher K. Bipes      mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst          mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.              http://www.cross-check.com
6119 State Farm Drive         Phone: 707 586-0551 x 1102 
Rohnert Park  CA  94928Fax: 707 586-1884 


-----Original Message-----
From: Karl Lauritzen [mailto:klauritzen@mail2.texnet.net]
Sent: Thursday, July 01, 1999 8:54 AM
To: MIDRANGE-L@midrange.com
Subject: Fax Via Ethernet to As400 outq

We are trying to get a Word document to fax via our network through FAXSTAR
on our as400.
We create a doc in Word, then we would like to choose File/Print and select
the 400 outq our Faxstar box is attached to.
We have successfully gotten as400 spool file to print on LAN network HP
printers. We are looking for the reverse now.
Can this be done. Really it is just like printing to an as400 print Que..
Faxstar uses an as400 outq. Our docs have the codes to make it fax.
We are trying to do this as we are replacing OV with Word and a product from
Netherlands called ITP Intelligent Text Processing. It allows you do get
as400 data to Word docs. We looked at domino/Notes but cost/fax
ability/money/management etc. led us to ITP.
Karl Lauritzen
Second Vice-President
Application Development
254-756-5531 x129 voice
254-399-0937  fax
www.natlloyds.com <http://www.natlloyds.com> 
klauritzen@mail2.texnet.net <mailto:klauritzen@mail2.texnet.net> 

| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].