× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Thanks: Date Simulators
  • From: Roger Boucher <RBoucher@xxxxxxxxxxx>
  • Date: Mon, 14 Jun 1999 10:26:50 -0700

Thanks to those who responded with information regarding the use of date
simulators.  Since I unfortunately didn't get any of the replies until
after I had left for our remote division... the testing plans were
written to incorporate the use of Simdate.  After work today I imagine I
will be spending the evening researching the archives at Midrange (as
someone suggested) to try and determine what the "holes" are that some
have been mentioned regarding the use of date simulators.

Thanks again.


> -----Original Message-----
> From: Roger Boucher 
> Sent: Wednesday, June 09, 1999 10:37 AM
> To:   MIDRANGE-L@midrange.com
> Subject:      Date Simulators
> 
> Please... HELP!! 
> 
> I have been working the last few days on reviewing the "IBM Y2K
> Testing and the AS/400 System Date" document and analyzing the
> potential ramifications for our testing effort.  This effort has been
> a result of a decision by our company to test the uncommon software
> used by one of our remote divisions... right smack dab on the
> Production AS/400... by setting the system date forward (and then back
> again after testing).  A decision has been handed down today to scrap
> that effort (thank goodness) and IMMEDIATELY get a date simulator to
> assist in our testing effort.
> 
> I have seen many posts regarding these products in the past, but have
> not kept the information due to our companies lack of desire to spend
> any time looking into this as a viable option.  Now I find myself in a
> position in which I need to collect as much information about date
> simulator products as possible... as fast as possible.  I am leaving
> today for this remote division to put together a test plan and
> needless to say I hope to be armed with at least a bit of knowledge.
> 
> Sorry for the long intro... but I would be tremendously grateful if
> anyone could provide some feedback as to the effectiveness and dangers
> of the use of date simulators for Y2K testing... and perhaps relate
> any experiences (good or bad) with any of these products.
> 
> Now I am off to the web to download Simdate and start setting it up as
> requested by the higher ups.
> 
> Thank you a hundred times over for any information provided...
> And then thank you a hundred times more!
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.