|
midrange.com
Still sounds like a configuration issue. Have you tried the option on the
IPL options screen to
"start this disvice only." That will start the system to a restricted
state.
you can also start DST and play around with configuration stuff. that way
you can see what resource names are attached to what config objects.
I think if you start in console debug mode the system uses different config
objects.
Bryan Dietz
3X Corp.
"DAVID BULOG" <d2ba@xtra.co.nz> on 05/07/99 06:53:40 AM
Please respond to MIDRANGE-L@midrange.com
To: MIDRANGE-L@midrange.com
cc: (bcc: Bryan Dietz/Columbus/3X Corp)
Subject: more help is required please-Model 200 problem--how
do I get out of trouble?
Thanks to all who responded-I have tried another unsuccessful attempt and
being a newbie dont know how to get out of trouble.Here is a detailed list
of all the events during my manual IPL:So more help is required please
System Consule =3197C terminal port0 address 0
01 B M---AS/400 Model 200 display
I hit the power button after 10 mins we get
IPL or Install the System
1.Perform an IPL
we get
System..ROTORUA
Subsystem..QCTL
Display..QCONSOLE
Sign On
User..QSECOFR
Password..QSECOFR
after a short while we get
Select Products to Work with PTFs
5763999 *Base V3R1M0
5763SS1 *Base V3R1M0
5763TC1 *Base V3R1M0
5763XA1 *Base V3R1M0
5763XB1 *Base V3R1M0
5763XC1 *Base V3R1M0
5763XF1 *Base V3R1M0
5763XG1 *Base V3R1M0
5763XL1 *Base V3R1M0
57399MPG *Base V3R1M0
F12 to cancel--i selected
we get IPL Options
Set Major System options--already had a Y in there to enable autoconfig
we now get a series of display messages
"Type reply(if required),press Enter"
Subsystem QCTL active when system ended.
Subsystem QSYSWRK active when system ended.
Subsystem QSPL active when system ended.
Subsystem QINTER active when system ended.
Subsystem QBATCH active when system ended.
Subsystem QCMN active when system ended.
Subsystem QSERVER active when system ended.
I pressed F12 canceled all of above
got x--normal system processing on terminal then lost it after a short
while(system consule=blank apart from cursor at 1/2 and system available
indicator and a 1 in bottom left hand corner
on AS/400 model 200 panel-C9002XXX (Operating system starting) at this
point
we soon after got to 01 B M and lots of hard disc activity for aboubt
10mins before settling down
and still same system consule problem.
TO POWER DOWN AS/400
i hit white power button
got o?-blinking on AS/400 display
i hit white power button again
after a few mins powered down(I hope this is the correct proceedure to
powerdown
if you have no ternimal and the objects cant be damaged by doing this?)
Dave B
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
