Re: Telnet Problem -- MIDRANGE-L

Is the TELNET server started.  use the command NETSTAT and select option 3.
You should see the telnet server started and use F14 to see the port it is
listening on.  If it is not started you can start it with the STRTCPSVR
*TELNET.  See below.
                       Work with TCP/IP Connection Status
                                                             System:
VAN400
 Local internet address  . . . . . . . . . . . :   *ALL

 Type options, press Enter.
   4=End   5=Display details

      Remote           Remote     Local
 Opt  Address          Port       Port       Idle Time  State
      *                *          ftp-con >  074:21:38  Listen
      *                *          telnet     000:00:21  Listen
      *                *          smtp       074:20:59  Listen
      *                *          www-http   031:23:03  Listen
      *                *          pop3       074:20:38  Listen
      *                *          snmp       074:21:40  *UDP
      *                *          lpd        074:21:26  Listen
      *                *          1026       074:20:55  Listen
      *                *          1027       074:20:55  Listen
      *                *          1027       074:21:40  *UDP
      *                *          1028       074:20:53  Listen

More...
 F5=Refresh   F11=Display byte counts   F13=Sort by column

 F14=Display port numbers   F22=Display entire field   F24=More keys

Hope this helps.
CJG
Carl Galgano
EDI Consulting Services, Inc.
540 Powder Springs Street
Suite C19
Marietta, GA  30064
770-422-2995
mailto: cgalgano@ediconsulting.com
http://www.ediconsulting.com
EDI, Communications and AS400 Technical Consulting

-----Original Message-----
From: Shen Jianjun <ipacsjj@public.sta.net.cn>
To: MIDRANGE-L@midrange.com <MIDRANGE-L@midrange.com>
Date: Wednesday, May 05, 1999 4:07 AM
Subject: Re: Telnet Problem


>
>Hi, Richard
>
>How can I check there has anything running on port 23. Our AS/400 has
>same problem. I can ping, but I can not telnet. The machine is 9406-620
>and the OS/400 version is V4.1
>
>Thanks.
>
>
>
>----------
>> From: rgh@us.ibm.com
>> To: MIDRANGE-L@midrange.com
>> Subject:
>> Date: Tuesday, May 04, 1999 10:16 AM
>>
>> Ken, The corrupted IFS file would have nothing to do with the Telnet
>server.  Go
>> look at the joblog the QTGTELNETS job using WRKJOB QTGTELNETS.  There
>should be
>> an indication of why the server job ended.
>>
>> On thought might be.  Are you running anything on port 23 that the telnet
>server
>> uses?
>>
>>  Richard G. Hartmann             Phone: 607-752-6731   IBM T/L: 852-6731
>>    AS/400 TCP/IP, Telnet Server/Client, Workstation Gateway, Print Server
>> development
>>    IBM Mail: Richard Hartmann/Endicott/IBM@IBMUS   Internet e-mail:
>> rgh@us.ibm.com
>>
>>
>> Date: Fri, 30 Apr 1999 08:14:54 -0700
>> From: Ken Slaugh <ken.slaugh@cm-inc.com>
>> Subject: RE: Telnet problem
>>
>> Yes, actually, we did. Our AS/400 had a corrupted file out in the IFS
>> and had to be deleted. If I remember correctly, an entire directory was
>> renamed and STRTCP built a new one. I do remember that the OS/400
>> versions may each have a different folder path and name. I hope this
>> helps, as it's all I gots.
>>
>> Ken Slaugh
>> Senior Programmer/System Analyst
>> AS/400 Professional Network Administrator/MSE
>> Specialist - Client Access/400
>> Chouinard & Myhre, Inc.
>>
>> > -----Original Message-----
>> > From:   benji@intercomputer.hu [SMTP:benji@intercomputer.hu]
>> > Sent:   Friday, April 30, 1999 1:41 AM
>> > To:     Midrange-l@midrange.com
>> > Subject:     Telnet problem
>> >
>> >
>> >
>> > Hi,
>> >
>> > we have a customer with an S30 running OS/400 V4R3. They cannot start
>> > Telnet service. TCP/IP and other services (FTP, POP etc.) run fine.
>> > We've
>> > tried STRTCPSRV *TELNET. We get a message that telnet has started, but
>> > this
>> > is not the case: QTGTELNETS should be active in QSYSWRK, but there's
>> > no
>> > trace of it. There are no signs of malfunction on the job log.
>> > Have somebody experienced a similar problem before?
>> >
>> >           Budai Benjamin
>> >             (ICSS Kft. - HUNGARY)
>>
>>
>>
>>
>> +---
>> | This is the Midrange System Mailing List!
>> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>> | To unsubscribe from this list send email to
>MIDRANGE-L-UNSUB@midrange.com.
>> | Questions should be directed to the list owner/operator:
>david@midrange.com
>> +---
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---