Re: 8mm for a 170

[Larry Bolhuis <lbolhui@xxxxxxx>]

Al,

  While you are correct (it's real tough to get a 2621 into a 170,
even tougher to make it work), Lorne was referring to the connection
to their 620.  I was pointing out that it must be connected to a 2621
since the 2729 does not support the 7208-002.

  - Larry

Al Barsa, Jr. wrote:
> 
> At 02:01 PM 4/24/99 -0400, you wrote:
> 
> The following comment is not correct.  2621 is an SPD card, and will not
> connect to a 170.
> 
> Al
> 
> > I suspect that if you check it will be connected to a 2621 card not a 2729.
> >
> > - Larry
> >
> >Lorne Sturgeoff wrote:
> >>
> >> Just for the record, the 7208-002 definitely connects to a 620.  We're
> >> doing it here with no special considerations.
> >>
> >> Lorne Sturgeoff
> >> Allied International Credit Corp.
> >> 11 Allstate Pkwy, Suite 500
> >> Markham ON Canada L3R 9T8
> >> Phone: 905 513 3517
> >> Fax:     905 470 8155
> >> Email: lgs@aiccorp.com
-- 
Larry Bolhuis         | What do you want to reload today?
Arbor Solutions, Inc  | 
(616) 451-2500        | Two rules to success in life:
lbolhui@ibm.net       | 1. Never tell people everything you know.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---