Sv: 8mm for a 170

Hi Tim

AS/400e series System Handbook GA 19-5486-17 (the Bible) says about 7208
model 342:
#2729 PCI Magnetic Media Controller
The #2729 card gives attachment to models ... 170 ...
The 7208 Model 342 requires V4R1 or later
#2729 requires V4R1 or later
#2729 requires a high-speed PCI slot. I'm not shure if Base unit slot C03
will qualify, or if you need an expansion unit #7101
... and then of cause the MFIOP and a cable.


Model 002 ????



Regards

Henrik Krebs

------------------------------------------------------------
Henrik Krebs
IT Consultant (IBM AS/400)
Phone +45 55 44 26 50
Mobile +45 40 88 83 23
Email: hkrebs@hkrebs.dk
Web: http://www.hkrebs.dk/
Snailmail: Kokhaven 8, DK-4736  Karrebaeksminde
------------------------------------------------------------


----------
> Fra: Tim McCarthy <TimM@softwarejungle.com>
> Til: 'MIDRANGE-L@midrange.com'
> Emne: 8mm for a 170
> Dato: 21. april 1999 18:06
> 
> For those less hardware challenged than I...What do I need on a 170 to
> attach an 8mm tape drive (7208-002).
> 
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---