Re: 9402-S20

[owner-midrange-l@xxxxxxxxxxxx]

You must be real lucky.  Aren't they 220?  Must have unplugged the drier to
get it working.
Dennis you should be able to use you PC and a standard cable to go from
port 0 of the first ASCII controller to you PC.
If running Win95+ you can use Hyperterm.  Or if you have Win3.1 grab the
Terminal program from there.  Of cource
Procomm ect also work.  I am going to guess that you need to set the parity
ect.  at 8-N-1 and 19200 baud.


Bryan Dietz
3X Corp.









"Dennis Lovelady" <dennis@lovelady.com> on 03/13/99 02:05:08 AM

Please respond to MIDRANGE-L@midrange.com
                                                                           
                                                                           
                                                                           


                                                              
                                                              
                                                              
 To:      midrange-L@midrange.com                             
                                                              
 cc:      (bcc: Bryan Dietz/Columbus/3X Corp)                 
                                                              
                                                              
                                                              
 Subject: 9402-S20                                            
                                                              








Hi, Folks:

I have been presented with a new toy: a 9402-S20 (so I'm told; I don't know
how to verify the model number on this system), which has two ASCII WSCs
and
no twinax.  The 3153 that came with this system seems to be dead, and I'd
like to know what options I have that would allow me to use a PC as a
console
to this system.  Do I need to go out and get some software program (I have
CA400), or are there other, more vanilla options?

The system tries to start up, but of course without a console, it
eventually
hangs up on a A600-xxxx SRC.

I'd appreciate any advice you have to offer on this.
Dennis
--
Dennis Lovelady                    Simpsonville, SC
mail: dennis@lovelady.com
URL:  http://lovelady.piedmont.net
ICQ:  5734860
--
"When a person with experience meets a person with money, the person with
experience will get the money.  And the person with the money will get some
experience."
        - Leonard Lauder


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---








+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---