RE: Question on the "good ole" IBM 4234 Printer

Press the New Page then the Eject.  When you press Start, the printer will
go back a page.   Let me know if you need any more information on this
printer since we do have one.  



Diana Hicks
Town of Jupiter
dianah@jupiter.fl.us

------------------------------
Date: Fri, 22 Jan 1999 12:24:35 -0500
From: Chuck Lewis <CLEWIS@IQUEST.NET>
Subject: Question on the "good ole" IBM 4234 Printer

Hi Folks !

We bought some 4234 printers on the used market. Unfortunately, while
they were supposed to come in with manuals, they didn't and it has been
a LONG time since I worked with these...

My question is on "removing" printed material... The form we have is 8
1/2 inches in length. I press Stop, Eject which feeds the printed form
forward and Start which drops the remaining forms out the bottom of the
printer. So I guessed it doesn't work the same as the 4230 which
repositions the form just FINE... So I press Stop, New Page (twice I
think it was), tear the printed form off and press Start. This wastes 2
forms and these are preprinted, 3 part carbonless forms and this COULD
get expensive

Is that the "nature of the beast" with these things our is there
something "manual-less" me is missing ?

Thanks !

Chuck

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---