Re: HP Jetdirect EX Plus

Eric,

I think that you specify the port you want in the "remote printer queue"
parameter. If I remember correctly, you put RAW in this parameter if it is
port 0, RAW1 for port 1, etc. We had a three port box that we had the same
problem with. We were only doing remote output queues at the time. This may
be different with a *LAN device.

I got this idea after looking at the manual for the HP JetDirect EX Plus.

Good luck,
Mark Welte





Eric <Eric@norcov.com> on 07/28/98 02:17:27 PM

Please respond to MIDRANGE-L@midrange.com

To:   "'midrange-l@midrange.com'" <midrange-l@midrange.com>
cc:    (bcc: MARK WELTE/DMTN)
Subject:  HP Jetdirect EX Plus




I am trying to set up two printers on a two port HP JetDirect EX Plus.  Has
anyone done this?  I have tried creating  *LAN TCP/IP printer devices with
the different port numbers (i.e. 9101, 9102, 9103) and I have tried to add
the port number to the I-Net address xxx.xxx.xxx.xxx:XXXX in the devd.  I
can not get the printer to work on the second port.  All output always goes
to the first port.
     We are on version 4.1 on a 620 e-series.  Also, I have found that I
always
have to setup a remote outq when I create a *LAN printer device.  Is this
normal or am I missing something.  Assistance is greatly appreciated.
 Thanks.

Eric Kempter
Director of MIS
Commair Mechanical Services

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---






+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---