Re: Remote Communications 5494

[Tim McCarthy <twmac@xxxxxxxxxxxxxx>]

I think we had a similar discussion a couple of months ago. Look at setting
up SNA pass through devices (SNPT).   

At 01:28 PM 7/22/98 -0500, you wrote:
>We have a 5494 remote workstation controller connected to a dedicated
>data line.  We are in the process of moving the line to another AS/400
>system, but in the meantime would like to have the printers and displays
>
>connected to this 5494 device accessible via another AS/400 on the same
>network (we are using passthru and remote writers right now, but the
>speed of the remote writers is inferior for our needs).    Is there a
>way to configure the 5494 to point to a different system while remaining
>
>physically connected to the same system as it is now?
>
>
>
>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator: david@midrange.com
>+---
>

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---