× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Device Desc. "Recreating"
  • From: Sannan Solberg <SSolberg@xxxxxxxxxxxx>
  • Date: Wed, 3 Jun 1998 10:06:36 -0600

We have mulitple 400's and I am only having this problem on one of them.
It's running V4R1 and the other boxes are anywhere from V3R2 thru V4R2.


Some of our users connect with Rumba which also lets you create a Print
session for your local printer.  This creates a device and outq on the
400 as you would expect.  The first time such an outq is created, you
expectedly get a "forms change" message with the first spool file you
send through it.  After that, you never see the message again.  On this
box, though, I was getting reports that they were getting it every
morning.  In tracking down the problem, I found that the log was
reporting that when a person (RE)CONNECTED (not disconnected) to the 400
with the print session, it was immediately varying off the existing
device, then deleting it, then creating a brand new device.  The Outq is
left intact.  Hence, the messages each morning they fire up the print
session since it is "new" every time.

I've looked at everything trying to figure why the 400 is doing this.
It isn't Rumba telling it to do it and I can't find anything on the 400
yet.  Any ideas??   TIA

**************************************************
Sannan Solberg                          (406)523-1392
Business/Programmer Analyst       (406)523-1636  fax
Washington Corporations             ssolberg@washcorp.com



> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.