|
Neil Palmer wrote: > > Yes, a little while after the 056 ! > Hey, they had an 056 keypuncher at my first part time operators job in > 1972 - along with 029's, those paper-tape controller remote card punch > comm thingies that were around 110bps, hardwired collators (085 ?), > reproducing punches, card interpreters, and an 80 column card sorter > that had vacuum tubes !!!! > > Neil Palmer AS/400~~~~~ > NxTrend Technology - Canada ____________ ___ ~ > Thornhill, Ontario, Canada |OOOOOOOOOO| ________ o|__||= > Phone: (905) 731-9000 x238 |__________|_|______|_|______) > Cell.: (416) 565-1682 x238 oo oo oo oo OOOo=o\ > Fax: (905) 731-9202 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > mailto:NPalmer@NxTrend.com AS/400 The Ultimate Business Server > http://www.NxTrend.com For the trivia nuts: The 056 was a verifier - like a keypunch, but only read the holes in the cards while the operator keyed in the data allegedy punched in the cards. If the typed data didn't match, the operator would "reject" the card (it would be offset in the stacker). The 082 sorter used a "thyratron" (sp?) vacuumn tube to energize the sort magnet -- 500 times a minute, if I recall. A vacuumn tube was used because the amount of current would have quickly eroded relay points. The 029 keypunch was a replacement for both the 024 and 026, which were identical, except the 026 was capable of printing along the top of the card. Originally designed to use "reed" relays instead of the more costly "wire contact" relays, the 029 became famous for intermittent problems due to sticking points in the reed relays. The reed relay design was later discarded in favor of the more expensive but reliable wire contacts -- much to the relief of IBM Customer Engineers. Anyone remenber the 010? Joe Frank > > > -----Original Message----- > > From: PaulMmn [SMTP:PaulMmn@ix.netcom.com] > > Sent: Wednesday, March 18, 1998 11:35 PM > > To: MIDRANGE-L@midrange.com > > Subject: Re: IBM Maintenance Withdrawal > > > > OH MY GOD! THEY KILLED KEY PUNCHES! I suppose the 026 Card Punch was > > discontinued previously... > > > > --Paul E Musselman > > PaulMmn@ix.netcom.com > > > > > +--- > | This is the Midrange System Mailing List! > | To submit a new message, send your mail to MIDRANGE-L@midrange.com. > | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com. > | Questions should be directed to the list owner/operator: david@midrange.com > +--- +--- | This is the Midrange System Mailing List! | To submit a new message, send your mail to MIDRANGE-L@midrange.com. | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com. | Questions should be directed to the list owner/operator: david@midrange.com +---
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.