Re:

Looks like you've got a problem at your AS/400. Try to look at QUSER job
logs - all remote servers by default run under QUSER profile.

Lo

Oleg Chirakhov wrote:
> 
> Hi ALL!
> Does anybody have successful expirience with RUNRMTCMD and CA/400 for
> W95/NT V3R1M2?
> Configuration:
> 1. NT4 & CA400 V3R1M2, one of the latest service pack
> 2. Connection using Netsoft router/8022
> 3. TP has been specified:
> "NS/Router properties"-"Common"-"Advanced Properities"-"Local TPs":
>              TP Profile name: AREXECD
>              TP Name:         AREXECD
>              TP filespec:     E:\PROGRA~1\IBM\CLIENT~1\AREXECDN.EXE
>              TP Param:        Empty
>              Windows state:   Normal (for debug purpose)
>              Convers. secur.  not checked
> >From PC5250 session I enter command:
> RUNRMTCMD CMD('DIR') RMTLOCNAME(APPN.MYLOC)
> I have see that AREXECDN.EXE window is appear and quickly disappear
> and no any action performed.
> There are message on PC5250:
> Problems occurred on the command, but the command completed.
> Previous message in job log:Remote program detected an error for
> conversation A.
> Full message text:
>                       Additional Message Information
> 
> 
> 
>  Message ID . . . . . . :   CPD3B7C       Severity . . . . . . . :  40
> 
>  Message type . . . . . :   Diagnostic
> 
>  Date sent  . . . . . . :   18.02.98      Time sent  . . . . . . :
> 20:48:26
> 
> 
>  Message . . . . :   Remote program detected an error for
> conversationA.
>  Cause . . . . . :   The remote program that was receiving
> datadetected an
>    error.  All remaining information, if any, that the
> receivingprogram has
>    not yet received, and that the sending program had sent beforebeing
> 
>    notified of the error, was discarded.
> 
>  Recovery  . . . :   The local program should issue a Receive
> (CMRCV)call to
>    receive data and then perform the error recovery procedures
> thathave been
>    agreed on with the remote program.  The remote program is in
> sendstate and
>    controls the error recovery procedures.
> 
>  Technical description . . . . . . . . :   A function managementheader
> type 7
>    (FMH7) with Systems Network Architecture (SNA) sense data
> of08890000 was
>    received from the remote system.  For more information on
> sensedata, see
>    the IBM SNA Formats manual, GA27-3136.
> 
> May you guy's can help?
> Any help are welcome.
> Thank you in advance
> 
> ==
> 
> Sincerely yours,
> Oleg A. Chirakhov
> 
> _________________________________________________________
> DO YOU YAHOO!?
> Get your free @yahoo.com address at http://mail.yahoo.com
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---