Re: tcp/ip no errors yet no ping either

["Mike Shaw" <mike@xxxxxxxxxxxx>]

David,

The AS/400 probably knows nothing about your domain name server(s) if they
are on the NT side.  Go to the CFGTCP menu and check out option 13.  It
should look like:

                           Change Remote Name Server                       
    
                                                                           
                                 System:   NAMC02   
 Type choices, press Enter.                                                
    
                                                                           
    
   Server address  . . . .   167.100.198.17         Internet address       
    
                                              167.100.111.17               
                      
                                                                           
    
   Server port . . . . . .            53                     1-65535       
             
   Server protocol . . . .   *UDP                   *UDP, *TCP             
    
   Retries . . . . . . . .   2                                     1-99    
                   
   Retry interval  . . . .   2                                 1-99
(seconds)              
   Searched first  . . . .   *REMOTE                *REMOTE, *LOCAL        
    
                                                                           
    
                                                                         
                                                                           
    
                                                                           
    
                                                                        
Bottom 
 F3=Exit   F12=Cancel                                                      
    
                                                                           
    
Make sure that the IP address(es) point to your DNS and the Searched first
is set to *REMOTE. 

HTH

Mike Shaw



----------
> Help! I got a v3r6 400 and NT domain .... all nt workstations work ok with
> dlc and now I have followed instructions in os/400 tcp/ip config, started
> up servers with no errors, the 400 can ping itself, but nothing on
network,
> same with with m$ workstations, ping each other but nothing on 400.  
> Anyone know the secret words to make this work?  
> 
> I know i've seen this topic in the list before so if anyone would even
give
> me a private response i would be most appreciative
> 
> tia
> David Nettles
> 
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> * This is the Midrange System Mailing List!  To submit a new message,   *
> * send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
> * this list send email to MAJORDOMO@midrange.com and specify            *
> * 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
> * should be directed to the list owner / operator: david@midrange.com   *
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> 


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *