Re: Connect 3196/7 to 5294

[willy <willy@xxxxxxxxxx>]

> willy wrote:
> >
> > Can IBM 3196 and 3197 display stations be connected to an IBM 5294
> > controller (at a remote location)?

Thanks to Pat, Tim and others who replied.  The problem seems to be
caused by mixing manual termination devices (5291 displays) with
auto-termination devices (3196/7s) on the same port.  I'll try powering
off everything, reconnecting from the end of the line back to the
controller, then powering on and reconfiguring the 5294 (a task I have
done a couple of times :-))

Willy  

----------------
  Willy Wilson                  
willy@riback.com           
Columbia, MO USA
----------------


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *