RE: Bridging

Dirk --
 If your Ethernet and TR LANs are on different subnets you can turn on IP
datagram forwarding for the ENTIRE AS/400 (I'm on V4R4, in CFGTCP it's
option 3, "change TCP/IP attributes". The drawback is the AS/400 will start
forwarding datagrams between ALL interfaces (dial up, twinax ... the whole
works) that are on different subnets. Besides eating up your AS/400
communications capability, you are open to "unintended consequences" in your
network when the AS/400 starts routing IP packets. 
 It may be a better deal to get a small router between just those two
network segments (JMHO, since I have no idea of what your network looks
like).
 If memory serves me there was a discussion about this in the "midrange-l"
list a while back, that should be in the archives.
George Lemen
Sr. Technical Consultant, CIBER Inc.
CIBER phone/voice mail: (425) 451-2575 x142; e-mail: glemen@ciber


> ----------
> From:         dirk.de.neve@newwave.be[SMTP:dirk.de.neve@newwave.be]
> Reply To:     MI400@midrange.com
> Sent:         Wednesday, September 20, 2000 3:55 AM
> To:   Mi400@midrange.com
> Subject:      Bridging
> 
> 
> 
> Our As400 has a TR card and a ETH card.
> Both lines have a separated IP Internetadress
> How can I use our As400 as a bridge between TR and ETH.
> Because at the moment Pc on the  token ring network, can not access Pc on
> the
> ethernet Network.
> Or should I change Pc settings.
> 
> Dirk
> _______________________________________________
> 
> Dirk De Neve
> Analyst Programmeur
> New Wave Logistics (Belgium) NV
> Keetberglaan 2 9120 Melsele
> Tel: +32 3 570.69.88
> GSM: +32 478 41.15.29
> mailto:dirk.de.neve@newwave.be
> 
> 
> 
> +---
> | This is the MI Programmers Mailing List!
> | To submit a new message, send your mail to MI400@midrange.com.
> | To subscribe to this list send email to MI400-SUB@midrange.com.
> | To unsubscribe from this list send email to MI400-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> dr2@cssas400.com
> +---
> 
+---
| This is the MI Programmers Mailing List!
| To submit a new message, send your mail to MI400@midrange.com.
| To subscribe to this list send email to MI400-SUB@midrange.com.
| To unsubscribe from this list send email to MI400-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: dr2@cssas400.com
+---