I would recommend that you attend the System i conference BY INFOR XA.
You will be able to meet with a few of us and discuss anything your heart desires, or your job requires.
I always leave with more knowledge ( ideas ) then I came with.
-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx [mailto:mapics-l-bounces@xxxxxxxxxxxx] On Behalf Of Chuck Mick
Sent: Thursday, July 08, 2010 9:27 AM
To: MAPICS ERP System Discussion
Subject: Re: [MAPICS-L] Product structure routings
Quick feedback
1. Confirm your bill of material.
2. If you are stocking the components in st01...the system will pull from there automatically once configured. The system (if entering traditionally in terminal emulation will prompt to confirm the location....)
3. Change each of the components to be controlled floor stock (item balance / warehose record...i think the planning tab)
4. Perform am rm to test....
5. Validate
Chuck Mick
(Sent from my phone...sorry for being brief.)
Confidential: This electronic message and all contents or attachments contain information from Diversified Machine, Inc. which may be privileged, confidential or otherwise protected from disclosure. The information is intended to be for the addressee only. If you are not the addressee, or have received this message in error, any disclosure, copy, distribution or use of the contents of this message is prohibited. If you have received this electronic message in error, please notify us immediately (248-277-4311) and destroy the original message and all copies. Thank you for your assistance in this matter.
** Please consider the environment before printing this e-mail **
-----Original Message-----
From: Guy Henza <guyhenza@xxxxxxxxxxx>
Sent: Thursday, July 08, 2010 9:10 AM
To: mapics-l@xxxxxxxxxxxx <mapics-l@xxxxxxxxxxxx>
Subject: Re: [MAPICS-L] Product structure routings
Thank you to everyone who has replied so far.
OK, management has decided that backflushing is the way to go. I have until the end of the day to get four items with four componets setup for backflushing. Anyone got a 30 minute turtotral on how to set up backflushing?
I found a series of manuals starting with MAPICSXA.pdf but nothing on backflushing.
Regards,
Guy Henza
517-278-2391 x248
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/mapics-l.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/mapics-l.
midrange.com
