Thanks, Nick.
I was hoping it was a wee bit more robust. :-(
Cheers!
Charley
Charley Simpson
Director, Material Planning & Logistics
805-426-3414
www.turboneticsinc.com
*** Please note that the information contained in this message may be
privileged and confidential and protected from disclosure. If the
reader of this message is not the intended recipient, or an employee or
agent responsible for delivering this message to the intended recipient,
you are hereby notified that any dissemination, distribution or copying
of this communication is strictly prohibited. If you have received this
communication in error, please notify us by replying to the message and
deleting it from your computer. Thank you. Turbonetics, Inc. ***
-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx
[
mailto:mapics-l-bounces@xxxxxxxxxxxx] On Behalf Of
Nick_Radich@xxxxxxxxxxxxxx
Sent: Thursday, July 12, 2007 12:52 PM
To: MAPICS ERP System Discussion
Subject: Re: [MAPICS-L] Cycle Count...
Hi Charley,
We just recently scrapped MAPICS' Cycle Count and I wrote our own.
MAPICS was too cumbersome to use, and you couldn't control how may parts
you counted per day.
Also, we had a problem when anyone did a PH transaction for an item in 1
location, MAPICS updated the Last PH Date in the ITEMBL file with the
new date, so we couldn't pick up that Item in any other location for the
next cycle count. I think the date of Last PH should be at the
Item/Locn level, not the Item/Whse.
I have ours set up to count a set amount of parts per day for each Cycle
Count Code. So every item will be counted at least once per year with
Cycle Counting.
Good Luck:-)
Thanx,
Nick
Nick Radich
Sr. Programmer/Analyst
EPC Molding, Inc.
Direct (320) 679-6683
Toll free (800) 388-2155 ext. 6683
Fax (320) 679-4516
nick_radich@xxxxxxxxxxxxxx
"Charley Simpson" <csimpson@xxxxxxxxxxxxxxxxxx> Sent by:
mapics-l-bounces@xxxxxxxxxxxx
07/12/07 02:41 PM
Please respond to
MAPICS ERP System Discussion <mapics-l@xxxxxxxxxxxx>
To
"MAPICS ERP System Discussion" <mapics-l@xxxxxxxxxxxx>
cc
Subject
[MAPICS-L] Cycle Count...
XA R6
Howdy!
We are getting ready to re-implement our Cycle Count initiative. While
I have used CC programs in other systems, I have not personally run the
XA one. Before I pull out the IM User Guide and cure my insomnia, are
there any pearls of wisdom that you folks are willing to share that will
help me short-cut my reading as well as my testing?
Thanks!
Charley
Charley Simpson
Director, Material Planning & Logistics
805-426-3414
www.turboneticsinc.com <
http://www.turboneticsinc.com/>
*** Please note that the information contained in this message may be
privileged and confidential and protected from disclosure. If the
reader of this message is not the intended recipient, or an employee or
agent responsible for delivering this message to the intended recipient,
you are hereby notified that any dissemination, distribution or copying
of this communication is strictly prohibited. If you have received this
communication in error, please notify us by replying to the message and
deleting it from your computer. Thank you. Turbonetics, Inc. ***
midrange.com
