× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: program message
  • From: "Jason M. Felice" <jasonf@xxxxxxxxxxxxxxxx>
  • Date: Sun, 24 Oct 1999 20:05:03 -0400

On Fri, Oct 22, 1999 at 11:10:59AM -0400, Sean Porterfield wrote:
> I've been getting some strange results with a program that works fine on
> (that other emulator!)  It has a lot of numeric fields and a subfile.
> One field allows the user to select how many lines will change on the
> roll.  When I keyed in 00001 (since field exit didn't seem to work well
> on that field) then page down, I got a program message that said
> starting dump.  Then it put me to "CPF5257 I/O error was detected in
> TBD0030 (C G S D F)" where TBD0030 is the DSPF.
> 
> Message . . . . :   CPF5257 I/O error was detected in TBD0030 (C G S D
> F).
>  Cause . . . . . :   The RPG program TBR0030 in library HD1100PO
> received the
>    message CPF5257 at statement 9300 while doing EXFMT I/O operation on
> file
>    TBD0030. Actual file is  HD1100PO/TBD0030 MEMBER - *N/A*. See the job
> log
>    for a complete description of message CPF5257.
> 
> I know it's related to the 00001 I keyed in the field, but I'm not
> exactly sure why it crashed.  I know now that I keyed too many digits -
> the field is defined as 4 digits, keyboard shift numeric.  It may have
> been OK if I keyed 0001 (I'll try that.)  If I try on Client Access, it
> says "Key used to exit field not valid" or similar message and won't let
> me put 5 digits.
> 
> I've almost answered my own question.  So the next question is: Can this
> be fixed?

No.  That it is impossible to fix.  It working on Client Access is just an
illusion ;)

I just made some updates in CVS which cleaned up field exit a tiny little
bit.  Try using Ctrl+K to exit the field (if you haven't already), but
certainly try after doing a 'cvs update'.

If this doesn't help (I don't actually suspect it will, but ...), send me
a tracefile and I'll look at it.

-Jay 'Eraserhead' Felice

+---
| This is the LINUX5250 Mailing List!
| To submit a new message, send your mail to LINUX5250@midrange.com.
| To subscribe to this list send email to LINUX5250-SUB@midrange.com.
| To unsubscribe from this list send email to LINUX5250-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.