× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Mark,
You should use the new DNS servers on your iSeries; the same as your PC 
network. 

Yes, I believe that you do need to restart TCP itself, not just the TCP 
servers for the DNS change to take effect, but I am not 100% positive on 
that.

I do know that as an immediate fix you can add the problem mail server and 
IP address to your iSeries host table. Just take it out later. I usually 
set the DNS options to check the host table first, then query DNS.
====================================
Tom Kreimer
Information Alternatives

Yes, I can. For review, here's what I did.

Firstly, the DNS Servers on my iSeries are 12.127.16.67 and 12.127.17.71.
AT&T does our DNS. We were given these to use years ago. Up until 
recently,
we didn't use internal DNS. Now we've upgraded to Windows Server 2003 as
our domain controllers. We use that for DNS. We serve the local IP
addresses of our domain controllers to our clients using DHCP for DNS.
192.168.0.5 and .0.6. The DNS server in our Windows server hop to
12.127.16.68 and 12.127.17.72. This was set up by our networking
consultant.

What I did was to change the DNS servers on my pc from DHCP to static
12.127.16.67 and 17.71. The same as on the iSeries on which our Domino
Server resides. From my PC, using the DNS servers that the iSeries uses, I
could not resolve an IP address for the mail server to which I'm trying to
send a message. When I change the PC back to using DHCP, I can resolve the
IP address of the mail server to which I'm trying to send a message. This
tells me that 12.127.16.67 and 17.71 are not up to date and 16.68 and 
17.72
are. I'm not a networking guy, but I'm the network guy here.

So now I have two questions. Should I use, on my iSeries, the IP address 
of
our Windows 2003 servers for DNS, or should I use the actual DNS servers
from AT&T? And, if I change these values, does TCP/IP have to be restarted
on the iSeries in order for the changes to take effect?

Did I totally confuse you now? :-)

Thanks,

Mark

Mark D. Walter
Senior Programmer/Analyst
CCX, Inc.
mwalter@xxxxxxxxxx
http://www.ccxinc.com

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.