RE: Long Time For Building Source File List.

Hi Mike,

        I don't ever load that stuff in designer anymore largely due to that 
which
you complain about.  I keep wdsci open all day anyway so when I need to
design a screen or print file, I find it in my wdsci 'Remote Systems'
perspective, highlight it, right button and choose 'Open With' and 'CODE
Designer'.  That fires off code and loads the member pretty much
immediately.  If I need to create a member, I do that first and load it
through wdsci as well.

hth

Regards

Rick DuVall
Systems Manager
Dealer's Auto Auction of Okc
405 947-2886 Ext:143
rick@xxxxxxxxxx


-----Original Message-----
From: code400-l-bounces@xxxxxxxxxxxx
[mailto:code400-l-bounces@xxxxxxxxxxxx]On Behalf Of Mike Pantzopoulos -
(H/O)
Sent: Wednesday, August 10, 2005 6:52 PM
To: code400-l@xxxxxxxxxxxx
Subject: Long Time For Building Source File List.


One of the major frustration factors I have with Code400/Designer is the
amount of time it takes to build the source file list when I first start
my connection in the morning. Some days it takes 2, 3, or 4 minutes to
build this list to enable me to drill down to the source member I want.
As I write this I am also waiting for the a DDS to load into Designer.
I've been waiting for  2m 35s. This is my first 'load' of the day, and I
have noticed that subsequent opens are much quicker.

Is it something in the configuration or do I just live with it and
eventually go back to PDM?

Any advice is welcome.

Thanks.

Mike Pantzopoulos




****************************************************************************
*****************************
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you are not the intended recipient, any use, disclosure or copying of
this message is unauthorised. If you have received this message in error,
please reply using the sender's email address.

This footnote confirms that this email message has been scanned for computer
viruses. EIG-Ansvar Limited does not accept liability for any loss or
damage, whether caused by our own negligence or not, that results from a
computer virus or defect in the transmission of this email or any attached
file.
EIG-Ansvar Limited - Australia (A.B.N. 21 007 216 506)
Email : insure@xxxxxxxxxxxxxxxx

Eig-Ansvar Limited - New Zealand
Email : insure@xxxxxxxxxxxxxxxx

****************************************************************************
*****************************

_______________________________________________
This is the CODE/400 Discussion & Support (CODE400-L) mailing list
To post a message email: CODE400-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/code400-l
or email: CODE400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/code400-l.

NOTE: WDSc for iSeries discussion has it's own mailing list.
Information can be found at
http://lists.midrange.com/cgi-bin/listinfo/wdsci-l