Hi Novak,

Thanks alot for the information.

The information was very good and infomative.

Can you please refer any document,which guide what to do,to install MM when
we had already are using CS.

I went through BPCS MM installation document, nothing much was found in it
, that speaks of taking care of previous CS.

Regards



On 8/5/08, Genyphyr Novak <Genyphyr.Novak@xxxxxxxxx> wrote:


Hello,

You need to get the Mixed Mode install media from Infor and restore a
new environment. Then you need to take the object library from the Mixed
Mode install, and update that to the same BMR level you have in your
Client/Server environment (which, if you have not stayed up to date on
BMRs in your CS environment you will have to update both at the same
time if you want to continue to use CS too and share the same
environment, so that all objects are at the same BMR level). You can use
the database library from your existing environment.

The so-called 'batch' programs ending in 'B' and 'C' in BPCS are the
same objects in MM and CS. In CS the display programs which control the
UI (ending in D, D1 D2 etc.) are replaced by another set of 'D' programs
and display files in MM. This is the main difference - the UI programs
are not the same objects, though the processing business logic is
exactly the same and they are generated from the same AS/SET definition.


There are instructions you can get from Infor365 Support to run a single
environment that supports both MM and CS simultaneously.

Thanks,

Genyphyr Novak | Senior Architect, ERP LX Architecture | Infor | office:
+33 450 53 93 70 | genyphyr.novak@xxxxxxxxx
SAVE THE DATE | Inforum 2008 | The Venetian Hotel and Sands Expo | Las
Vegas | October 14 - 16 | http://www.inforum2008.com

INSCRIVEZ-VOUS ! | Inforum France 2008 | Centre Eurosites George V |
Paris | Jeudi 13 novembre 2008 | http://www.infor.fr/inforumfrance2008/


message: 1
date: Mon, 4 Aug 2008 15:18:18 +0530
from: "Krishna Kant" <bpcs.erp@xxxxxxxxx>
subject: [BPCS-L] implementing mixed mode

Hi ,

can any one please help me figure out , what all is needed to implement
Mixed mode if i am already using CS.

i am using version 8.2.

thanks
madie

--
This is the BPCS ERP System (BPCS-L) mailing list
To post a message email: BPCS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/bpcs-l
or email: BPCS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/bpcs-l.

Delivered-To: bpcs.erp@xxxxxxxxx


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2022 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.