× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Having worked with this before, I suggest the correct spelling should be DEMON 
;-).

-----Original Message-----
From: bpcs-l-bounces+ssegerstrom=intermatic.com@xxxxxxxxxxxx
[mailto:bpcs-l-bounces+ssegerstrom=intermatic.com@xxxxxxxxxxxx]On Behalf
Of Genyphyr Novak
Sent: Wednesday, July 26, 2006 10:43 AM
To: bpcs-l@xxxxxxxxxxxx
Subject: Re: [BPCS-L] CEA Damien job start (DAEMON)


Hi, 

Wow - now we are an Omen movie ;-) Just a correction to all - it's known
as a daemon, not damien! ;-)

You do not need to create ports. The iSeries operating system maintains
these as part of TCP/IP (assuming TCP/IP is started on your box). You
just need to ensure with use of the NETSTAT command that a port number
that you want to use with BPCS is not already being used for something
else. Any number between 1 and 65535 is usually valid, though you will
find that other software might be using other ports and in general ports
over 5000 are safer, as many lower port numbers get reserved for system
functions. When you use NETSTAT if a job is started to that port, there
is an option to view the job - ensure it is really the ALAUNCH job and
that there is no MSGW or other odd status (you can end and restart the
job if there is some abnormal error). 

If it's not ALAUNCH but something else which is taking up that port,
maybe you now have installed some new software which is already using
that port? Write down the program name and figure out whose software it
belongs to. If this is the case, you can either reconfigure that
software to use another port and restart that software, or you can start
the BPCS ALAUNCH daemon to a new port (but in this case all your users
will need to update their workstation settings to point to the new port
number).

If things are really a mess, you can end and restart TCP/IP, though
generally this should not be required.

BMR 67665 is required for V5R3 and higher releases of OS/400 to run any
Client/Server daemon (Newi or Alaunch). If you order and apply this BMR
for Alaunch, your command to start ALAUNCH will change (STRALD) and you
will get some better diagnostic messages (and will be able to configure
your environment differently and more flexibly if you like) - but it's
not a required upgrade at V5R2. 

Thanks,

Genyphyr Novak
Senior System Software Engineer
SSA Global R&D



------------------------------

message: 4
date: Tue, 25 Jul 2006 22:21:31 +0200
from: "Davide Roveda" <Davide.Roveda@xxxxxxxxxxxxx>
subject: Re: [BPCS-L] CEA Damien job start

Hello

Please, check if needed BMR 67665. 

I do not remember exactly if for V5R2 or V5R3. 

Regards

Davide


------------------------------

message: 7
date: Wed, 26 Jul 2006 10:50:11 -0400
from: "Wes Reinhold" <WesR@xxxxxxxxxxx>
subject: Re: [BPCS-L] CEA Damien job start

You can allocate a port to the job using WORK WITH PORT RESTRICTIONS in
CFGTCP so nothing else grabs that port.  That's what we had to do.
After that it worked fine.  (V5R3) 

-----Original Message-----
From: bpcs-l-bounces+wesr=scc-inc.com@xxxxxxxxxxxx
[mailto:bpcs-l-bounces+wesr=scc-inc.com@xxxxxxxxxxxx] On Behalf Of Steve
Segerstrom
Sent: Wednesday, July 26, 2006 10:14 AM
To: SSA's BPCS ERP System
Subject: Re: [BPCS-L] CEA Damien job start

The last time I spent 3 days solving a problem like this:1 1. Moved to a
new port - using netstat as a tool to make sure had a good port. I used
both 5000 and 5001 successfully. 
2. There was a job that hung up 5000; ended and started 5000. 5000
worked after we switched back from 5001. 
3. We ran fine on version v5r2 (and beyond) 

good luck. looks like you have 

-----Original Message-----
From: bpcs-l-bounces+ssegerstrom=intermatic.com@xxxxxxxxxxxx
[mailto:bpcs-l-bounces+ssegerstrom=intermatic.com@xxxxxxxxxxxx]On Behalf
Of Moy, Bill
Sent: Tuesday, July 25, 2006 2:24 PM
To: SSA's BPCS ERP System
Subject: Re: [BPCS-L] CEA Damien job start


IF using TCP/IP You should be able to use the NETSTAT command prompt use
otion *CNN this will show the ports. Look for your port 5000 in the
local col. It should be in the listen state. If working correctly.

Bill

-----Original Message-----
From: rfolsom@xxxxxxxx [mailto:rfolsom@xxxxxxxx]
Sent: Tuesday, July 25, 2006 1:23 PM
To: SSA's BPCS ERP System
Cc: bpcs-l-bounces+rfolsom=yupo.com@xxxxxxxxxxxx; bpcs-l@xxxxxxxxxxxx
Subject: Re: [BPCS-L] CEA Damien job start

I'm sure someone will correct me if I'm wrong, but I don't believe you
can "create" the port.  The installation instructions say that you can
use any unused port (they suggest 5000, but I guess 5100 is just as
good).  Have you reconfigured the session manager settings since going
to V5R2?  That may be all you need to do.
Rick Folsom, IT Administrator
Yupo Corporation America
757-819-9230



 

             fwsoftware@xxxxxx

             m

             Sent by:
To 
             bpcs-l-bounces+rf         bpcs-l@xxxxxxxxxxxx

             olsom=yupo.com@mi
cc 
             drange.com

 
Subject 
                                       [BPCS-L] CEA Damien job start

             07/25/2006 02:03

             PM

 

 

             Please respond to

              SSA's BPCS ERP

                  System

             <bpcs-l@midrange.

                   com>

 

 





Hello,

I'm trying to get BPCS CEA going and keep getting the same error,
Physical server not started. I believe it has something to do with the
Daemon job on the server.
Question, how do we create a port on the AS/400 that will service the
Daemon job and incoming CEA jobs?
Here is the command I'm running and it's worked before on v5r1 OS/400
I'm running this on a v5r2 box, again I believe the problem is that port
5100 does not exist now on the new box how the heck do I create this
port.

I have not heard of any problems of running CEA on v5r2.

Thanks in advance
Dave


 SBMJOB     CMD(CALL PGM(MMTCP/ALAUNCH) PARM('5100')) +
                 JOB(XX_IPJOB) JOBD(MMTCP/TCPIPJOBD) +
                 JOBQ(QGPL/BPCSTCPIP) INLLIBL(MMTCP +
                 BPCSTCPUSR QGPL)
________________________________________________________________________


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.