RE: Asset ADK display program problem

One other thing to check might be the character mapping on the displays
that are giving you errors.

-----Original Message-----
From: bpcs-l-bounces+dsweeney=phoenixbcinc.com@xxxxxxxxxxxx
[mailto:bpcs-l-bounces+dsweeney=phoenixbcinc.com@xxxxxxxxxxxx] On Behalf
Of GLangston@xxxxxxxx
Sent: Monday, September 19, 2005 4:34 PM
To: SSA's BPCS ERP System
Subject: RE: [BPCS-L] Asset ADK display program problem

No it is not on all displays or pc's. 

Thanks,

Glen Langston
843 664-4263
glangston@xxxxxxxx
 



"Dan Sweeney" <dsweeney@xxxxxxxxxxxxxxxx> 
Sent by: bpcs-l-bounces+glangston=esab.com@xxxxxxxxxxxx
09/19/2005 04:10 PM
Please respond to
"SSA's BPCS ERP System" <bpcs-l@xxxxxxxxxxxx>


To
"'SSA's BPCS ERP System'" <bpcs-l@xxxxxxxxxxxx>
cc

Subject
RE: [BPCS-L] Asset ADK display program problem






Are you getting the same results on all terminals and pc's?

The emulation program that you are running normally should not make a
difference.

It sounds as though the error is in the display file code.  Just a
thought.

-----Original Message-----
From: bpcs-l-bounces+dsweeney=phoenixbcinc.com@xxxxxxxxxxxx
[mailto:bpcs-l-bounces+dsweeney=phoenixbcinc.com@xxxxxxxxxxxx] On Behalf
Of GLangston@xxxxxxxx
Sent: Monday, September 19, 2005 3:54 PM
To: bpcs-l@xxxxxxxxxxxx
Subject: [BPCS-L] Asset ADK display program problem

Hello, 

We have Asset ADK version 6.0 and we have some terminals and pc's
running 
Iseries access (not all) having trouble when they go into an asset
display 
program for maintenance. The screen shown to them will show as follows:

|Item Type               B | 
|Item Class              BB | 
|Item Status/Condition   EE | | (00-99 
|Stock U/M               BB + 

Does anyone have an idea what may be causing the '|' to show? We have 
looked at version of Iseries access we are running, version of Windows 
along with service pack, etc.. 

Thanks,

Glen Langston
 This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom
they are addressed.
If you have received this email in error please notify the
originator of the message. This footer also confirms that this
email message has been scanned for the presence of computer viruses.
Any views expressed in this message are those of the individual
sender, except where the sender specifies and with authority,
states them to be the views of ESAB Welding & Cutting.