× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: BPCS 6.1mm performance and the AS/400
  • From: "Vivian Tu" <vtu@xxxxxxxxxx>
  • Date: Sat, 12 Feb 2000 17:54:02 -0600

Sandy,

What version did your shop run before BPCS6.1? Do you have the same problem
in older version?

We are currently running the BPCS 6.0.04 mixed mode version on our AS/400
and  have been through severe performance problem before(We have upgraded
our hardware to solve the problem).  According to SSA, BPCS6.1 mixed mode
should  have better response time than BPCS6.0.04.   We are planning to
upgrade to BPCS6.1 soon.  However, if BPCS 6.1 still has performance issue,
we need to do more research before action.


Vivian


----- Original Message -----
From: <Forwiw@aol.com>
To: <BPCS-L@midrange.com>
Sent: Friday, February 11, 2000 4:08 PM
Subject: BPCS 6.1mm performance and the AS/400


>     Hello everyone,
>
>      We are currently running the BPCS 6.1 mixed mode version on our
>     AS/400.  We have approx. 20 - 25 users and experiencing very slow
>     response times, locally and at our remote location -- 8 to 20 minutes
>     to enter one order is an example.
>
>     We have already added more hard drives and memory.
>
>     I have talked with IBM and they see no problems with memory or hard
disks.
>
>     I have talked with SSA they recommended to upgrade the processor.  But
>     to which one?
>
>     We are looking into upgrading our 2175 model 620, but would like to
>     hear from someone who is already running the same BPCS 6.1 mm
>     version, and what AS/400 is working good for them.
>
>     Any help would be greatly appreciated.  It will sure make our users
> happier.
>
>     Sandy
>
>
>
>
>
> +---
> | This is the BPCS Users Mailing List!
> | To submit a new message, send your mail to BPCS-L@midrange.com.
> | To subscribe to this list send email to BPCS-L-SUB@midrange.com.
> | To unsubscribe from this list send email to BPCS-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner: dasmussen@aol.com
> +---

+---
| This is the BPCS Users Mailing List!
| To submit a new message, send your mail to BPCS-L@midrange.com.
| To subscribe to this list send email to BPCS-L-SUB@midrange.com.
| To unsubscribe from this list send email to BPCS-L-UNSUB@midrange.com.
| Questions should be directed to the list owner: dasmussen@aol.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.