× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Glad you liked my post. I just wanted to get to the grounds of it.
(My professional life goes back to IBM System/38 serial number #78 (an IBM internal machine from 1980/81 (5381) with 3375 external DASD) when I was a youngster).

Pity though, that we can't do much about this System Debugger behaviour on PUB400.
I simply can't think of any way to change that.

The Java debugger component tes.jar is not part of the open source of JT400 (or JtOpen) either,
otherwise I would have looked at the source code; I made few attempts to trace it with WireShark, but it's a lot of work.
My gut feeling is, that the MATPRATR might not even be absolutely necessary, but it's no more than only a gut feeling.

Wilhelm

---
________________________________
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> on behalf of Sam_L <lennon_s_j@xxxxxxxxxxx>
Sent: Thursday, April 25, 2024 8:18 PM
To: midrange-l@xxxxxxxxxxxxxxxxxx <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: Re: INFO: IBM i System Debugger not stopping on breakpoints

Excellent research! Thanks.

(But I bet the only fix, if any, will be to the documentation.)

On 4/25/2024 11:45 AM, Wilhelm R. Stanzl wrote:
INFO: IBM i System Debugger not stopping on breakpoints
=======================================================

This is a post inspired by two past posts which did not find a correct solution:

"ACS System Debugger doesn't want to work" https://archive.midrange.com/midrange-l/202210/msg00244.html
and
"System Debugger" https://archive.midrange.com/midrange-l/202306/msg00321.html

Both posts describe the problem that System Debugger wouldn't stop on breakpoints (with the breakpoints briefly flashing in yellow).

I also observed this, on a local V7.2 system and on PUB400 V7.5

Quick Answer:
-------------

The debugging user needs *JOBCTL special rights for this to work.

This applies to debugging option "Submit and debug program in batch job"

N.B.:
PUB400 won't allow *JOBCTL - for a good reason, see below - so this won't work until (hopefully) IBM fixes this.


Analysis and Details:
---------------------

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related questions.


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.