× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Thinking about it...

While the %TRIMR() should be a no-op if the data is already trimmed...
I don't think %LEN(%TRIMR()) would be...

Depending on how often this is called, I might get rid of the %TRIMR()...or
only do them if the %LEN() is larger than the 64k expected.

But the change to CONST and the use of STATIC will greatly increase the
performance compared to the original.

Charles

On Tue, Apr 16, 2024 at 8:21 AM Charles Wilt <charles.wilt@xxxxxxxxx> wrote:

Since g_clob_data is CHAR(5242880)

The %LEN(g_clob_data) is always 5242880, so yep you're writing out blanks.

You should use %LEN(i_5000000);

But even there, if the data is passed in with trailing blanks, then yep
you're getting 5MB written out.

A quick fix would be to add OPTIONS(*TRIM) to the parameter, but that
would require a recompile of callers.

You could also add %TRIMR(), but you'd end up doing so twice...

Personally, I'd prefer to ensure the data is trimmed at the origin and
then pass in as CONST instead of VALUE instead of copying the value to the
stack.
Also, I'd define g_clob as STATIC, to keep from having it created and
deleted (and INZ) for every call.

I might take a boots and suspenders approach, including a %TRIMR() ... if
the data is already trimmed it should be a no-op.

dcl-pi
i_5000000 varchar(5242880) CONST;
end-pi;

dcl-s g_clob sqltype(clob:5242880) static;

g_clob_data = %TRIMR(i_5000000);
g_clob_len = %len(%TRIMR(i_5000000));

insert into table(myClob)
values (:g_clob);


Charles


On Tue, Apr 16, 2024 at 7:38 AM Jay Vaughn <jeffersonvaughn@xxxxxxxxx>
wrote:

we have a procedure...

dcl-pi
i_5000000 varchar(5242880) value;
end-pi;

dcl-s g_clob sqltype(clob:5242880) inz;

g_clob_data = i_5000000;
g_clob_len = %len(g_clob_data);

insert into table(myClob)
values (:g_clob);


thoughts?

Jay







On Tue, Apr 16, 2024 at 9:31 AM Charles Wilt <charles.wilt@xxxxxxxxx>
wrote:

If you have RPG code writing out the table, I'd look there first.

Make sure the RPG code is properly handling the varchar data.

Charles

On Tue, Apr 16, 2024 at 7:00 AM Jay Vaughn <jeffersonvaughn@xxxxxxxxx>
wrote:

So Charles,

We have a table developed to hold a request clob (5mb) and a response
clob
(5mb) ONLY for storage and auditing purposes.
Not to run queries against.

We have been finding out that some off platform load tests are being
performed and even though the api calls to put rows in this table
should
have 1mb or less requests/responses, we are maxing out the DASD on
that
test box and this table ends up with 821G of data.

Again our requests/responses should be well under 1mb each.

So is this table just a bad idea or are we simply over dominating the
box
with our load test volume?

Next time this happens I really want to look at the rows and see what
these
columns have in them.

thanks

Jay








On Mon, Apr 15, 2024 at 6:51 PM Jay Vaughn <jeffersonvaughn@xxxxxxxxx

wrote:

Thanks Charles.

I’lllook into the allocate but big relief on the storage concern.

Jay

On Apr 15, 2024, at 5:44 PM, Charles Wilt <charles.wilt@xxxxxxxxx

wrote:

Nope...

variable length data is stored in the overflow section of the
table...

Downside of that is that when you read the row, it takes 2 I/Os.
One
for
the row space and one for the overflow.

If you were mostly writing less that 32k, I'd tell you to take a
look
at
the ALLOCATE clause. That does cause space to be reserved in the
standard
table space. Which wastes space, but then the data only needs 1
I/O
to
be
read.

Charles


On Mon, Apr 15, 2024 at 2:20 PM Jay Vaughn <
jeffersonvaughn@xxxxxxxxx

wrote:

Let’s say I have a table with a 5mb clob column.

Most of my transactions that write to the table mostly consist of
64k
and
less chars written to the clob but we want to reserve the much
higher
storage allocation for when we need it

When the 64k chars are written to that clob on the row, the
entire
5mb
of
storage is not written to disk is it??

Tia

Jay

Sent from my iPhone
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription
related
questions.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription
related questions.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription
related
questions.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription
related
questions.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.