Re: How to configure an HP printer on my LAN

Thank you for the reply...

I tried the link below. I created an outq with this:
CRTOUTQ OUTQ(QUSRSYS/&DEVNAME)
RMTSYS(*INTNETADR) +
RMTPRTQ(RAW) AUTOSTRWTR(1)
CNNTYPE(*IP) +
DESTTYPE(*OTHER) TRANSFORM(*YES) +
MFRTYPMDL(*HP520 ) WSCST(QWPDEFAULT)
+
INTNETADR('192.168.168.27') DESTOPT(XAIX)
+
SEPPAGE(*NO)

I have also tried:
MFRTYPMDL(*WSCST)
MFRTYPMDL(*HP4000)
MFRTYPMDL(*IBM42011)
MFRTYPMDL(*HPDBCS )
MFRTYPMDL(*HP4 )

I can't figure out how to get it to print in Landscape and I
can't get it to print to Drawer 2.

With all of the above configurations I have tried changing
the Source drawer to 2

Does anyone have any ideas?

Thank you,

Gary Kuznitz


On 9 Oct 2021 at 19:15, Larry (Larry "DrFranken" Bolhuis
<midrange@xxxxxxxxxxxx>) commented about Re: How
to configure an HP printer on my LAN:

Have you looked here:
https://www.ibm.com/support/pages/information-printers-hp

- L

On 10/9/2021 5:53 PM, Gary Kuznitz wrote:

I would like to print from a P9 V7r4 to an HP8620 printer
on my network.

I've tried:
CRTDEVPRT DEVD(&DEVNAME) DEVCLS(*LAN)
TYPE(3812) +
MODEL(1) LANATTACH(*IP) PORT(9100) +
ATTACH(*DIRECT) ONLINE(*YES) FONT(011 +
*NONE) FORMFEED(*AUTOCUT) +
SEPDRAWER(*FILE) PRTERRMSG(*INQ) +
MSGQ(*CTLD) ACTTMR(170)
INACTTMR(*SEC15) +
LINESPEED(19200) WORDLEN(8)
PARITY(*NONE) +
STOPBITS(1) TRANSFORM(*YES) +
MFRTYPMDL(*HP5SI) PPRSRC1(*LETTER) +
PPRSRC2(*LETTER) ENVELOPE(*NUMBER10) +
ASCII899(*NO) IMGCFG(*NONE) +
CHRID(*SYSVAL) +
RMTLOCNAME('192.168.168.27') +
USRDFNOPT(*IBMSHRCNN) +
SYSDRVPGM(*IBMSNMPDRV)
PUBLISHINF(*DUPLEX +
*COLOR *UNKNOWN *UNKNOWN *BLANK
*UNKNOWN) +
TEXT('HP8620 ')

Then I WRKWTR Go to outq press 2 to change
enter options below:
CRTOUTQ OUTQ(QUSRSYS/HP86202)
RMTSYS(*INTNETADR) +
RMTPRTQ(PASS) AUTOSTRWTR(1)
CNNTYPE(*IP) +
DESTTYPE(*OTHER) MFRTYPMDL(*HP4) +
INTNETADR('192.168.168.27') SEPPAGE(*NO)

I'm getting an error saying:
Message ID . . . . . . : CPA405C Severity . . . . . . . :
99
Message type . . . . . : Inquiry
Date sent . . . . . . : 10/09/21 Time sent . . . . . . :
14:43:56

Message . . . . : An input tray needs attention on device
HP86202 (C R).
Cause . . . . . : An error was detected on device
HP86202. This may have
been caused by something like an input tray missing or
an input tray empty.
Look at the printer to determine the cause of the
problem.
Possible choices for replying to message . . . . . . . . . . . .
. . . :
C -- Enter C to cancel the writer.
R -- Enter R to continue printing the file after the
problem at the printer
has been corrected.

Does anyone know how to configure an HP inkjet printer?

Thanks,

Gary Kuznitz

--
IBM Champion for Power Systems

www.iInTheCloud.com - Commercial IBM i and Power System Hosting
www.iDevCloud.com - Personal IBM i Hosting
www.Frankeni.com - IBM i and Power Systems Consulting.