Rob,
Did you receive a TCP9110 30 DIAGNOSTIC The maximum threshold for SNTP Client errors has been reached?
Paul
-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Rob Berendt
Sent: Tuesday, November 19, 2019 10:07 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: RE: NTP vs SNTP
I guess NTP vs SNTP is not a mission critical thing. After all, this system was off by 3 minutes until last week when we noticed that it wasn't communicating to the ntp server due to firewall issues. So if I mangle it I can reverse it without too much issue, right? I may try it when I get a few other things cleared off of my plate.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxxxxxxxx> On Behalf Of Kevin Bucknum
Sent: Tuesday, November 19, 2019 9:55 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: RE: NTP vs SNTP
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
There shouldn't be any difference. It is a client difference, not a protocol difference. The server shouldn't care what the client is using. I think anything running windows 10 is now NTP.
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxxxxxxxx] On Behalf Of Rob Berendt
Sent: Tuesday, November 19, 2019 8:42 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: NTP vs SNTP
Apparently NTP is a new thing with 7.3 and above. It can be used instead of SNTP as a client to keep your clocks in sync. I only discovered this because I was using the webby IBM Navigator for i. Drilled down into TCP, Servers and checked SNTP and tried to view Connection Status and it was blank. Opened up a ticket. The support person had to look it up and get back to me. Basically it will be blank unless you change your client type from SNTP to NTP. He changed it on his system and then the connection status screen was active.
It all sounds simple to me until I start worrying about if that will come through different ports, etc on our firewall thus having to get numerous network consultants from different companies involved (DMZ lpar). And if there might be any required modifications on the SNTP servers to support NTP. At this time I'm thinking not worth it. What say ye?
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit:
https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at
https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxx for any subscription related questions.
Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
[
https://www.medtronsoftware.com/img/MedtronMinilogo.bmp] Kevin Bucknum
Senior Programmer Analyst
MEDDATA / MEDTRON
120 Innwood Drive
Covington LA 70433
Local: 985-893-2550
Toll Free: 877-893-2550
https://www.medtronsoftware.com
CONFIDENTIALITY NOTICE
This document and any accompanying this email transmission contain confidential information, belonging to the sender that is legally privileged. This information is intended only for the use of the individual or entity named above. The authorized recipient of this information is prohibited from disclosing this information to any other party and is required to destroy the information after its stated need has been fulfilled. If you are not the intended recipient, or the employee of agent responsible to deliver it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or action taken in reliance on the contents of these documents is STRICTLY PROHIBITED. If you have received this email in error, please notify the sender immediately to arrange for return or destruction of these documents.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxx for any subscription related questions.
Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
As an Amazon Associate we earn from qualifying purchases.