× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. March 2018

Connect Ops Console and/or DST on Bare Metal




message: 1
date: Mon, 19 Mar 2018 15:29:02 -0300
from: Roberto Jos? Etcheverry Romero <yggdrasil.raiker@xxxxxxxxx>
subject: Re: Connect Ops Console and/or DST on Bare Metal

Quick input. HMC=0/1 means that the machine WAS connected to an HMC. You
will have to erase that configuration to be able to use it in single-lpar
mode. The machine might not even support IBM i, it's detailed inside the
ASMI in one of the tabs (IBM i capable and 5250 capable or something like
that).
I would take care removing cpu-cards without putting the fillers in.
Airflow on the newer machines is very tightly calculated and a missing card
or filler might cause overheating.
Best regards!


There was a HMC connection listed in the ASMI, and I did delete the entry.
The HMC=0 remains on the pull out control panel though.

As for the CPU fillers, they just act as baffles to direct airflow, correct?



As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.