Update from IBM.
The developers response: Yes, this is related to recent code changes and the fix is in MF63881 which has been approved and will become generally available later today or tomorrow.
Also had a PAL entry for this.
B900FDC5 09/06/17 21:05:28 Error detected in system licensed program
PTF 5770999-MF63881 V7R1M0 loaded into library QGPL.
PTF 5770999-MF63881 V7R1M0 temporarily applied to library QGPL.
DUPMEDBRM tested with no issues.
Paul
-----Original Message-----
From: Steinmetz, Paul
Sent: Friday, September 08, 2017 10:34 AM
To: 'midrange-l@xxxxxxxxxxxx'
Subject: RE: BRMS DUPMEDBRM failed with MCH1202, MCH3402
V7R1 Test PTF MF63881 released.
DESCRIPTION OF PROBLEM FIXED FOR APAR 'MA46486' :
-------------------------------------------------
A SRC63A09500 Product Activity Log entry may occur for D/T3572
if extended error recovery is required when checking the status
of an element in the tape library.
CORRECTION FOR APAR 'MA46486' :
-------------------------------
An unsupported command was being sent to the D/T3572 tape
library. The code has been changed to no longer send the
unsupported command to the tape library.
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
Sent: Friday, September 08, 2017 9:40 AM
To: midrange-l@xxxxxxxxxxxx
Subject: Re: BRMS DUPMEDBRM failed with MCH1202, MCH3402
I've not had that problem but since I'm duping a bunch of tapes today that will be used to run from IRMA I might run into it. Thanks for the heads up.
--
Jim Oberholtzer
Agile Technology Architects
On 9/8/2017 7:49 AM, Steinmetz, Paul wrote:
To all,
Since recently applying, 8/27, latest V7R1 CUM 17192, latest BRMS Group SI64274, I've had BRMS DUPMEDBRM fail twice with the following errors.
Open PMR with IBM, waiting for answers, possible test PTF in the works.
IBM stated others have reported similar issue.
Anyone from the group experiencing similar issues?
MCH1202 Escape 40 09/06/17 21:05:27.910308 QTADUP QSYS 009C QTADUP QSYS 009C
Message . . . . : Decimal data error.
Cause . . . . . : The sign or the digit codes of the packed or the zoned
decimal operand is in error. Valid signs are hex A-F, valid digit range is
hex 0-9.
MCH3402 Escape 40 09/06/17 21:06:53.813567 QTADUP QSYS 1E28 QTADUP QSYS 1E28
Message . . . . : Tried to refer to all or part of an object that no longer
exists.
Cause . . . . . : The most common cause is that a stored address to an
object is no longer correct because that object was deleted or part of the
object was deleted.
Thank You
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx
http://www.pencor.com/
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at
http://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxx for any subscription related questions.
Help support midrange.com by shopping at amazon.com with our affiliate link:
http://amzn.to/2dEadiD
midrange.com
