If both QCTL and QBASE are running here is what I would do correct the current problem.
ENDSBS SBS(QBASE) OPTION(*CNTRLD) DELAY(*NOLIMIT)
This will prevent any new jobs from entering QBASE without effecting current jobs, when all of the current jobs running in QBASE finally end QBASE will shut down.
This does not answer the question of how QBASE got started, but base upon everything I have seen so far it appears that it was manually started.
from: Rob Berendt <rob@xxxxxxxxx>
subject: Re: Upgraded to 7.3 & all INT jobs now run in QBASE not
QINTER
Then who started QBASE? It had have been started manually.
Did someone look for all subsystem descriptions and just start them?
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.dekko.com&d=DwICAg&c=AY-yVZ-DdqDeX_Emj_gQCkuxsL_QuG_4YQ-FxcTYVkY&r=3HmdsZESHvzaTBSHTdB6CStwTAVF1kiyCWu3SC-2oh0&m=ZRJ8IMO55uHR7D_BBLB8IOlaUo2_kavUVky3F8h6Ino&s=tTCCs09akXsXzqYyi-Zo3ytCaB-pEUeJKNZgfywnpPA&e=
From: Scott Williams <scottwill0707@xxxxxxxxx>
To: midrange-l@xxxxxxxxxxxx
Date: 07/24/2017 09:49 AM
Subject: Re: Upgraded to 7.3 & all INT jobs now run in QBASE not
QINTER
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
[snip]
What is the value of
WRKSYSVAL QCTLSBSD
on your system?
[/snip]
* Display System Value *
* System value . . . . . : QCTLSBSD *
* Description . . . . . : Controlling subsystem *
* Controlling subsystem . . . : QCTL *
* Library . . . . . . . . . : QSYS *
[snip]
Also
DSPSYSVAL QSTRUPPGM
record that. The default is QSYS/QSTRUP [/snip]
* Display System Value *
*System value . . . . . : QSTRUPPGM *
*Description . . . . . : Startup program *
*Startup program . . . . . . : QSTRUP Name, *NONE *
* Library . . . . . . . . . : QSYS Name *
[snip]
CRTSRCPF QTEMP/QCLSRC
RTVCLSRC PGM(QSYS/QSTRUP) SRCFILE(QTEMP/QCLSRC) DSPPFM QTEMP/QCLSRC
You will see a section like this:
...
QSYS/RTVSYSVAL SYSVAL(QCTLSBSD) RTNVAR(&CTLSBSD)
IF COND((&CTLSBSD *NE 'QCTL QSYS ') *AND (&CTLSBSD *NE-
'QCTL QGPL ')) THEN(GOTO CMDLBL(DONE))
QSYS/STRSBS SBSD(QINTER)
MONMSG MSGID(CPF0000)
QSYS/STRSBS SBSD(QBATCH)
MONMSG MSGID(CPF0000)
QSYS/STRSBS SBSD(QCMN)
MONMSG MSGID(CPF0000)
DONE:
[/snip]
Yes, I see exactly that.
--
QBATCH is currently empty as there are no batch jobs running, but they do run in QBATCH. The current list for QCTL is as follows:
* Opt Subsystem/Job User Type CPU % Function Status
*
* QCTL QSYS SBS .0 DEQW
*
* QSYSSCD QPGMR BCH .0 PGM-QEZSCNEP EVTW *
and a pile of users in QBASE...
*Opt Subsystem/Job User Type CPU % Function Status *
* QBASE QSYS SBS .0 DEQW *
* XX XXXXX INT .0 PGM-XXXXXX DSPW *
* XX XXXXX INT .0 PGM-XXXXXX DSPW *
* XX XXXXX INT .0 PGM-XXXXXX DSPW *
* XX XXXXX INT .0 PGM-XXXXXX DSPW *
* XX XXXXX INT .0 MNU-XXXXXX DSPW *
* XX XXXXX INT .0 MNU-XXXXXX DSPW *
* XX XXXXX INT .0 PGM-XXXXXX DSPW *
* XX XXXXX INT .0 PGM-XXXXXX DSPW *
--
Scott Williams
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit:
https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.midrange.com_mailman_listinfo_midrange-2Dl&d=DwICAg&c=AY-yVZ-DdqDeX_Emj_gQCkuxsL_QuG_4YQ-FxcTYVkY&r=3HmdsZESHvzaTBSHTdB6CStwTAVF1kiyCWu3SC-2oh0&m=ZRJ8IMO55uHR7D_BBLB8IOlaUo2_kavUVky3F8h6Ino&s=RPvo2hHnjtEmuGWV3frHkaFQ05THhbprtfmwD0cCdWM&e=
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at
https://urldefense.proofpoint.com/v2/url?u=http-3A__archive.midrange.com_midrange-2Dl&d=DwICAg&c=AY-yVZ-DdqDeX_Emj_gQCkuxsL_QuG_4YQ-FxcTYVkY&r=3HmdsZESHvzaTBSHTdB6CStwTAVF1kiyCWu3SC-2oh0&m=ZRJ8IMO55uHR7D_BBLB8IOlaUo2_kavUVky3F8h6Ino&s=9jGJ99WdgL-Bzyfd64mNa4cTYd17b2vz2jYfU16aoRQ&e= .
Please contact support@xxxxxxxxxxxx for any subscription related questions.
Help support midrange.com by shopping at amazon.com with our affiliate
link:
https://urldefense.proofpoint.com/v2/url?u=http-3A__amzn.to_2dEadiD&d=DwICAg&c=AY-yVZ-DdqDeX_Emj_gQCkuxsL_QuG_4YQ-FxcTYVkY&r=3HmdsZESHvzaTBSHTdB6CStwTAVF1kiyCWu3SC-2oh0&m=ZRJ8IMO55uHR7D_BBLB8IOlaUo2_kavUVky3F8h6Ino&s=tggqcQaIn9JnuOyEW8SWBBDBd9fcod_iE6sovf2Zim4&e=
------------------------------
message: 4
date: Mon, 24 Jul 2017 14:06:05 +0000
from: Alan Shore <ashore@xxxxxxxx>
subject: RE: ACS 1.1.7.1 released (broehmer@xxxxxxxxxxxxxxx)
Hi everyone
Where can I obtain this?
Alan Shore
E-mail : ASHORE@xxxxxxxx
Phone [O] : (631) 200-5019
Phone [C] : (631) 880-8640
'If you're going through hell, keep going.'
Winston Churchill
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Tim Rowe
Sent: Monday, July 24, 2017 9:44 AM
To: midrange-l@xxxxxxxxxxxx
Subject: Re: ACS 1.1.7.1 released (broehmer@xxxxxxxxxxxxxxx)
Greetings, Joys of the IBM Web pages. We can updates the FTP site
pretty much when we need to. The other Web pages, we have to make the
updates and then submit them to the Web Master. Sometimes it the next
day... other times its not. So yea. there are times where the main page
is not up to sync with the FTP download site. Also, for those that use
the auto update notification support, we dont turn that flag on on the web
site until the main page has been updated. Causes way too much confusion.
As pointed out, the readme is always current.
As per normal, there is a pile of new feature and function that has been
delivered in this update. Thanks to all of you in the community that let
us know additional function that we need to provide.
Tim
Tim Rowe, [1]timmr@xxxxxxxxxx
Business Architect Application Development & Systems Management for IBM i
IBM i Development Lab, Rochester, MN
(507) 253-6191 (Tie) 553-6191
[2]
https://urldefense.proofpoint.com/v2/url?u=http-3A__www-2D03.ibm.com_systems_power_software_i_are_index.html&d=DwICAg&c=AY-yVZ-DdqDeX_Emj_gQCkuxsL_QuG_4YQ-FxcTYVkY&r=3HmdsZESHvzaTBSHTdB6CStwTAVF1kiyCWu3SC-2oh0&m=ZRJ8IMO55uHR7D_BBLB8IOlaUo2_kavUVky3F8h6Ino&s=SsN7KP7o9UTSF349p4iCKCijjQQCh4i5mWlBATVaWyw&e=
<midrange-l-bounces@xxxxxxxxxxxx>
message: 1
date: Sun, 23 Jul 2017 22:55:58 -0500
from: [3]broehmer@xxxxxxxxxxxxxxx
subject: Re: ACS 1.1.7.1 released
I typically wait to download those things. I was just hoping
someone had already done that (and obviously you did that thank you very
much!).
Seem to recall that those changes were on the website
before you downloaded it. Maybe I'm misremembering.
However what I saw was a date that didn't match up with
what they were displaying. Not a big deal. But thanks again!
Bill
</midrange-l-bounces@xxxxxxxxxxxx>
References
Visible links
1. mailto:timmr@xxxxxxxxxx
2.
https://urldefense.proofpoint.com/v2/url?u=http-3A__www-2D03.ibm.com_systems_power_software_i_are_index.html&d=DwICAg&c=AY-yVZ-DdqDeX_Emj_gQCkuxsL_QuG_4YQ-FxcTYVkY&r=3HmdsZESHvzaTBSHTdB6CStwTAVF1kiyCWu3SC-2oh0&m=ZRJ8IMO55uHR7D_BBLB8IOlaUo2_kavUVky3F8h6Ino&s=SsN7KP7o9UTSF349p4iCKCijjQQCh4i5mWlBATVaWyw&e=
3. mailto:broehmer@xxxxxxxxxxxxxxx
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit:
https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.midrange.com_mailman_listinfo_midrange-2Dl&d=DwICAg&c=AY-yVZ-DdqDeX_Emj_gQCkuxsL_QuG_4YQ-FxcTYVkY&r=3HmdsZESHvzaTBSHTdB6CStwTAVF1kiyCWu3SC-2oh0&m=ZRJ8IMO55uHR7D_BBLB8IOlaUo2_kavUVky3F8h6Ino&s=RPvo2hHnjtEmuGWV3frHkaFQ05THhbprtfmwD0cCdWM&e=
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at
https://urldefense.proofpoint.com/v2/url?u=http-3A__archive.midrange.com_midrange-2Dl&d=DwICAg&c=AY-yVZ-DdqDeX_Emj_gQCkuxsL_QuG_4YQ-FxcTYVkY&r=3HmdsZESHvzaTBSHTdB6CStwTAVF1kiyCWu3SC-2oh0&m=ZRJ8IMO55uHR7D_BBLB8IOlaUo2_kavUVky3F8h6Ino&s=9jGJ99WdgL-Bzyfd64mNa4cTYd17b2vz2jYfU16aoRQ&e= .
Please contact support@xxxxxxxxxxxx for any subscription related questions.
Help support midrange.com by shopping at amazon.com with our affiliate link:
https://urldefense.proofpoint.com/v2/url?u=http-3A__amzn.to_2dEadiD&d=DwICAg&c=AY-yVZ-DdqDeX_Emj_gQCkuxsL_QuG_4YQ-FxcTYVkY&r=3HmdsZESHvzaTBSHTdB6CStwTAVF1kiyCWu3SC-2oh0&m=ZRJ8IMO55uHR7D_BBLB8IOlaUo2_kavUVky3F8h6Ino&s=tggqcQaIn9JnuOyEW8SWBBDBd9fcod_iE6sovf2Zim4&e=
------------------------------
message: 5
date: Mon, 24 Jul 2017 10:07:07 -0400
from: DrFranken <midrange@xxxxxxxxxxxx>
subject: Re: Configuring disk for self maintenance.
Yes it would have. :-(
Now the bad news is that to end RAID you'll need to IPL to DST.
The good news is that just before you do that you can swap D1 and D2 so the LS is in D1. :-)
- Larry "DrFranken" Bolhuis
www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.
On 7/24/2017 9:38 AM, Rob Berendt wrote:
Aha! I see this now.
9. Start hot spare
When I kill the raid set and actually have some disks available I'll
have to see how that works.
Hmm, I wonder if doing it this way would have allowed me to keep my
load source physically as D1 instead of having that defaulted to the
hot spare drive?
Dag nab it Larry, why didn't you tell me this before? :-)
Rob Berendt
------------------------------
Subject: Digest Footer
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) digest list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit:
https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.midrange.com_mailman_listinfo_midrange-2Dl&d=DwICAg&c=AY-yVZ-DdqDeX_Emj_gQCkuxsL_QuG_4YQ-FxcTYVkY&r=3HmdsZESHvzaTBSHTdB6CStwTAVF1kiyCWu3SC-2oh0&m=ZRJ8IMO55uHR7D_BBLB8IOlaUo2_kavUVky3F8h6Ino&s=RPvo2hHnjtEmuGWV3frHkaFQ05THhbprtfmwD0cCdWM&e=
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at
https://urldefense.proofpoint.com/v2/url?u=http-3A__archive.midrange.com_midrange-2Dl&d=DwICAg&c=AY-yVZ-DdqDeX_Emj_gQCkuxsL_QuG_4YQ-FxcTYVkY&r=3HmdsZESHvzaTBSHTdB6CStwTAVF1kiyCWu3SC-2oh0&m=ZRJ8IMO55uHR7D_BBLB8IOlaUo2_kavUVky3F8h6Ino&s=9jGJ99WdgL-Bzyfd64mNa4cTYd17b2vz2jYfU16aoRQ&e= .
Please contact support@xxxxxxxxxxxx for any subscription related questions.
Help support midrange.com by shopping at amazon.com with our affiliate link:
https://urldefense.proofpoint.com/v2/url?u=http-3A__amzn.to_2dEadiD&d=DwICAg&c=AY-yVZ-DdqDeX_Emj_gQCkuxsL_QuG_4YQ-FxcTYVkY&r=3HmdsZESHvzaTBSHTdB6CStwTAVF1kiyCWu3SC-2oh0&m=ZRJ8IMO55uHR7D_BBLB8IOlaUo2_kavUVky3F8h6Ino&s=tggqcQaIn9JnuOyEW8SWBBDBd9fcod_iE6sovf2Zim4&e=
------------------------------
End of MIDRANGE-L Digest, Vol 16, Issue 1154
********************************************
⚠ This email is from an external address. Exercise caution when following links or opening attachments. ⚠
________________________________
This email message, including any attachment(s) is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is strictly prohibited. If you are not the intended recipient, please immediately contact the sender by email.
midrange.com
