× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Larry,

Currently have 256 gb memory.
Production - 155
R&D - 80
Sandbox - 8
Sandbox - 2

My next system I would probably double, 512, at least.

500 to 1000 users.

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of DrFranken
Sent: Tuesday, February 28, 2017 9:42 PM
To: Midrange Systems Technical Discussion
Subject: Re: Power 9

For a Power8 you could easily get that down a click from P20 to P10 tier and into a 6 Core machine. Transfer the 3 IBM i Licenses and you'll have plenty of zip.

Now you didn't say how much memory you need but the 6 and 8 Core Power8s have a limit at 1T IIRC.

Now the P20 to P10 drop will lower your SWMA but you'll need to purchase IBM i users as your P20 licenses while more expensive don't need users.

For Power9 you'll probably need 32 cores with 30 of them licensed for IBM i. But that's just a SWAG. :-)



- Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 2/28/2017 7:21 PM, Steinmetz, Paul wrote:
If I'm running a P7 8205 E6C, 8 cores, but only 3 activated for i5/OS,
Production 1.5, R&D .5, two sandbox .3 and .2.
What would the equivalent P8 requirements be?
What would the equivalent P9 requirements be?

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of DrFranken
Sent: Tuesday, February 28, 2017 7:16 PM
To: Midrange Systems Technical Discussion
Subject: Re: Power 9

To quote Captain Yugi Nagata from the movie Battleship: "That's not what it means. Not even close."

You almost NEVER need additional processors for such partitions. Since the workload is often moved from a production partition it's just a move not additional. In addition today's processors are so beefy that almost all Power Systems machines have plenty of space processing power.

Memory, maybe but again since workload is often transferred this may be movable as well. Then consider that memory costs have dropped so far so fast that we configure 32 and 64 GB as a baseline these days. You can almost always fit an 8G partition in there.

i5/OS hasn't been marketed for a decade and even IBM i Licenses are not needed here. Unless you actually have to license another core you send the IBM corporation *zero bucks.

Like Jim said in the first place it's mostly storage and a base partition can be had in 70G no problemo so that's not likely a problem either.

I would have thought by now we would have gotten this point across!!


- Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 2/28/2017 6:29 PM, Steinmetz, Paul wrote:
You also need additional processors, memory, and i5/OS licenses.

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Jim Oberholtzer
Sent: Tuesday, February 28, 2017 5:10 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Power 9

I see virtual test partitions in the future......

Never fails to happen. It's easy fast and as long as you have the storage,
cheap.


--
Jim Oberholtzer
Agile Technology Architects


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
(WalzCraft) Jerry Forss
Sent: Tuesday, February 28, 2017 3:55 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Power 9

Thanks Jim,

I have been debating on if we should to get one or not.

At THIS point it would be just a single LPAR. But the future, who knows.

I have proposed enough DASD (SSD drives and RAM) to make it possible.

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Jim Oberholtzer
Sent: Tuesday, February 28, 2017 3:24 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Power 9

Then there is a NEW CONSOLE in your very near future. I highly recommend the HMC even if you only have one partition to start. Take my word for it, it will come in handy, albeit a bit pricey.


--
Jim Oberholtzer
Agile Technology Architects


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
(WalzCraft) Jerry Forss
Sent: Tuesday, February 28, 2017 9:27 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Power 9

We have a TWINAX old large tube console. :)

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Chris Bipes
Sent: Tuesday, February 28, 2017 9:10 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Power 9

One concern I would have is the HMC. IF you are using an HMC, there
is no version that will run both a power 5 and a power 8 or above.
The HMC running Version 7 will handle a power 5 through 7 but not the
power 8. An HMC running version 8 will not communicate with a power
5. :(

Just a heads up. My business partner totally missed that when sell me new power 8's to replace old power 5's.

Chris Bipes
Director of Information Services
CrossCheck, Inc.

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Jim Oberholtzer
Sent: Tuesday, February 28, 2017 7:02 AM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: RE: Power 9

Well maybe a little. You won't be able to do a direct migration but there are ways to get you on to the new box (at V7Rx) without too much trouble.
That's where you might want to budget for some help. Those of us who do this all the time see it as only a bit more complicated than a regular unload/reload.

You might help yourself now by looking at QUSRSYS and QGPL and see what "user objects" meaning anything you created are in there, since those two libraries really provide the most intrigue to a migration like this. Move as many of those objects (not including out queues etc) out of those libraries to a library of your own making in the correct position in the library list. That'll make the migration to V7Rx much easier.


--
Jim Oberholtzer
Agile Technology Architects


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
(WalzCraft) Jerry Forss
Sent: Tuesday, February 28, 2017 8:52 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Power 9

We have LTO 3's.
Going to LTO 5 will read them, just not write to them.

Yep, being at 7.1 handcuffs us a bit.


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Rob Berendt
Sent: Tuesday, February 28, 2017 8:49 AM
To: Midrange Systems Technical Discussion
Subject: RE: Power 9

Try this line:
If you're open to going to going to at least 7.2 they could save a few thousand bucks with an S812 vs an S814.
Unless you just want to growth of the S814 instead (multi lpar capability and more).

Of course your 525 won't support anything higher than 7.1
http://www-01.ibm.com/support/docview.wss?uid=ssm1platformibmi
Then again, does any newer hardware support the tape drive you're using on your 525? Like, how are you going to migrate from that?
BTW, just what tape drive are you using?


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600
Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: Rob Berendt <rob@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 02/28/2017 09:41 AM
Subject: RE: Power 9
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



Well, 7.1 is a show stopper for the new S812. That requires 7.2 or 7.3, and both with a new TR announced but not coming out until after our March downtime.


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600
Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: "(WalzCraft) Jerry Forss" <JForss@xxxxxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 02/28/2017 09:37 AM
Subject: RE: Power 9
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



It took me 2 years to finally get the upgrade from 5.4 to 7.1.
Nothing will be happening today....tomorrow.... or in the next couple of months (or longer).

I know I will be asked how much life is left in the Power 8 before the Power 9.

If I got the go ahead for the Power 8 today I do not think I would be
able

to contain my excitement.

Just trying to be prepared for the questions.

Thanks!!

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Jim

Oberholtzer
Sent: Tuesday, February 28, 2017 8:31 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Power 9

Oh yea, that's like going from a Yugo to a Ferrari. The 525 is (was) a fine
box, but it's Power5 and such. Even a 4 way would be a massive upgrade
in
power.


--
Jim Oberholtzer
Agile Technology Architects


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Rob

Berendt
Sent: Tuesday, February 28, 2017 8:28 AM
To: Midrange Systems Technical Discussion
Subject: Re: Power 9

I am not familiar with the 525 and whether or not the new S812 will cut the mustard for you.


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600
Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: "(WalzCraft) Jerry Forss" <JForss@xxxxxxxxxxxxx>
To: "Midrange Systems Technical Discussion (midrange-l@xxxxxxxxxxxx)"
<midrange-l@xxxxxxxxxxxx>
Date: 02/28/2017 09:06 AM
Subject: Power 9
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



Hi All,

Several months ago I put together a proposal to replace our i5 box
(9406-525) with a new shinny Power 8.

This proposal is going to be pushed again.

Does anyone know when the Power 9 box/config are going to be announced?
The config/pricing of a Power 9 will be different than the Power 8.

Thanks!!!!

Jerry Forss
Information Technology Team
WalzCraft
608-781-6355 EXT 2530
jforss@xxxxxxxxxxxxx


Subject to Change Notice:

WalzCraft reserves the right to improve designs, and to change
specifications without notice.

Confidentiality Notice:

This message and any attachments may contain confidential and
privileged information that is protected by law. The information
contained herein is transmitted for the sole use of the intended
recipient(s) and should "only" pertain to "WalzCraft" company matters.
If you are not the intended


recipient or designated agent of the recipient of such information,
you are hereby notified that any use, dissemination, copying or
retention of this email or the information contained herein is
strictly prohibited and may subject you to penalties under federal
and/or state law. If you received this email in error, please notify
the sender immediately and permanently delete this email. Thank You;

WalzCraft PO Box 1748 La Crosse, WI. 54602-1748

www.walzcraft.com<http://www.walzcraft.com/> Phone... 800-237-1326

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link: http://amzn.to/2dEadiD


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.