This was due to test PTF MF61265, Ethernet process got hung up.
IBM development left something out on the PTF activation instructions.
Same issue I had on other 2 LPARS last week.
Restarted from HMC with dump option.
MSD took about an hour.
LPAR IPL'd fine with no issues.
All is good.
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rob Berendt
Sent: Wednesday, March 16, 2016 4:26 PM
To: Midrange Systems Technical Discussion
Subject: RE: LPAR has no sessions - black screen - no HMC console
And if you can't sign on because you have auto cfg turned off, and all sessions are varied off then use RMTCMD from your PC, (or ftp session) to vary them on.
Disabling devices upon invalid signon is an effective method to initiate a denial of service attack against an IBM i. It also works pretty good to disable known user profiles like QSECOFR.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Jim Oberholtzer" <midrangel@xxxxxxxxxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 03/16/2016 03:33 PM
Subject: RE: LPAR has no sessions - black screen - no HMC console
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
If you can sign on from another device try varying on the console device.
I
see that from time to time.
--
Jim Oberholtzer
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rob
Berendt
Sent: Wednesday, March 16, 2016 7:46 AM
To: Midrange Systems Technical Discussion
Subject: Re: LPAR has no sessions - black screen - no HMC console
If, not just your regular sessions, but your console session is down also,
then I do not suspect QINTER is your issue.
I would do a Communications, Disconnect then a Communications, Connect and
try to reconnect your HMC console session.
Um, I assume that the lpar has a Status of "Running" and the Reference
Code
is all zeros?
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 03/16/2016 08:04 AM
Subject: LPAR has no sessions - black screen - no HMC console
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
One of my V7R1 LPARs, iSeries Access sessions have black screen.
HMC console session - 0043 Connected - waiting for partition screen data
HMC shows LPAR is running, no SRC codes.
Any thoughts from the group?
I guess I have to force restart the LPAR from HMC.
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx
http://www.pencor.com/
As an Amazon Associate we earn from qualifying purchases.