John,
You have to specifically order the HTTP Server PTF group. Another poster
replied to you with the PTF group code of SF99115 which I believe is
correct.
Rich
--------------------------------------------------------------------------
On 10/22/2014 4:00 PM, John Allen wrote:
Thanks,
That is one thing I left out of my post.
I am ordering the latest cumulative PTF.
Will that include the latest HTTP Server PTF Group??
-----Original Message-----
From: Rich Loeber [[1]mailto:rich@xxxxxxxxx]
Sent: Wednesday, October 22, 2014 3:49 PM
To: Midrange Systems Technical Discussion
Subject: Re: Cannot access HTTP Admin Server = Internal
Server Error
John,
I had this problem when I first went up to 6.1. I had to
install the
latest HTTP Server PTF Group. Once I did that, then it
started working
just fine.
Good luck.
Rich Loeber - @richloeber
Kisco Information Systems
[1][2]
http://www.kisco.com
------------------------------------------------------------
--------------
On 10/22/2014 3:43 PM, John Allen wrote:
I am trying to access the web admin page at
999.999.999.999:2001
Also trying 999.999.999.999:2001/HTTPAdmin
Both return "Internal Server Error"
We are running 6.1
I installed all of the Java licensed programs
5761JV1 *BASE IBM Developer Kit for Java
5761JV1 6 Java Developer Kit 1.4
5761JV1 7 Java Developer Kit 5.0
5761JV1 8 J2SE 5.0 32 bit
5761JV1 9 J2SE 5.0 64 bit
5761JV1 10 Java Developer Kit 6
5761JV1 11 Java SE 6 32 bit
5761JV1 12 Java SE 6 64 bit
Still same error
When I start Server Instance *ADMIN
It appears Jobs ADMIN2 and ADMIN3 are running but there are
no ADMIN1 or ADMIN4 jobs
The only error I see in the joblog is:
CIM0301 Diagnostic 40 10/22/14
12:46:45.330514 QUMEUTILS QUME *STMT
QUMEUTILS
QUME *STMT
From module . . . . .
.
. . : QUMEMSGCLS
From procedure . . .
.
. . : joblogIt__10umeMessageFQ2_10umeMessage11umeLog
Level
Statement . . . . . .
.
. . : 46
To module . . . . . .
.
. . : QUMEMSGCLS
To procedure . . . .
.
. . : joblogIt__10umeMessageFQ2_10umeMessage11umeLog
Statement . . . . . . . . . : 46
Message . . . . : CIMOM server job not submitted. Reason
code 05.
Cause . . . . . : The Common Information Model Object
Manager (CIMOM) server
job, QUMECIMOM, was not submitted to batch. The reason
code is 05. Reason
Codes: 01 - The QUMECIMOM server job is already running.
02 - Submit Job
(SBMJOB) command failed. 03 - Unexpected error. 04 -
Required (5761-SS1 for
IBM i 6.1, 5770-SS1 for IBM i 7.1) option 33 (Portable
App Solutions
Environment) is not installed. 05 - Required 5733-SC1
option 1 (OpenSSH,
OpenSSL, zlib) is not installed. 06 - Subsystem is not
active. 07 - Required
SLP is not installed. Recovery . . . : Only one CIMOM
server job can be
active or on the job queue. If the job is currently
ending, wait until the
job is completely ended before attempt to start it again.
Install option 33
of base OS (5761-SS1 for IBM i 6.1, and 5770-SS1 for IBM
i
7.1) and try the
command again. Install option 1 (OpenSSH, OpenSSL, zlib)
of 5733-SC1 and try
the command again. For all the other errors, see previous
the messages to
figure out what caused the failure. Correct the errors
and try the command
again.
Where Reason Code 05 is:
05 - Required 5733-SC1 option 1 (OpenSSH, OpenSSL, zlib) is
not installed.
Followed by:
TCP1A10 Diagnostic 20 10/22/14
12:46:45.741420 QTOCSRV QSYS 0D97
QTOCSTSVRS QSYS
To module . . . . . .
.
. . : QTOCSTSVRS
To procedure . . . .
.
. . : main
Statement . . . . . .
.
. . : 15
Message . . . . :
CIMOM server not started.
Cause . . . . . : An
error occurred while starting CIMOM server. Recovery .
. . : See the
previously listed messages. Correct the error and then try
the request again.
When I go into install licensed programs there is not any
5733-SC1
So I'm not sure how I am supposed to install it or is it an
erroneous error (or maybe I don't need CIMOM Server???)
I have seen several references (From Google) that says job
ADMIN4 must be running, but no reference as to potential
reason why it's not running (not starting)
QHTTPSVR QSYS SBS .0
DEQW
ADMIN QTMHHTTP BCH .0 PGM-QZHBMAIN
SIGW
ADMIN QTMHHTTP BCI .0 PGM-QZSRLOG
SIGW
ADMIN QTMHHTTP BCI .0 PGM-QZSRHTTP
SIGW
ADMIN2 QLWISVR BCI .0 JVM-com.ibm.lw
THDW
ADMIN3 QLWISVR BCI .0 JVM-com.ibm.lw
THDW
I also looked in QIBM/UserData/HTTPA/admin/logs but I can't
find anything of help to me there, although there are a lot
of files in the directory
I also ran:
Once in QShell, type the following commands (pressing Enter
after each line):
export JAVA_HOME=/QOpenSys/QIBM/ProdData/JavaVM/jdk50/32bit
java QIBMHello
export JAVA_HOME=/QOpenSys/QIBM/ProdData/JavaVM/jdk60/32bit
java QIBMHello
And these worked fine
I also ran this:
ls -l /bin
and
ls -l /lib
And these worked fine
Anyways, does anyone know if I am in fact supposed to have
ADMIN4 running? (and ADMIN1??)
If yes, can you point me in the general direction of where
I might find the answer
Why else can I look at for reason why I am getting the
Internal Server Error
Thanks in advance
John
References
Visible links
1. [3]
http://www.kisco.com/
--
This is the Midrange Systems Technical Discussion
(MIDRANGE-L) mailing list To post a message email:
[4]MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change
list options,
visit: [5]
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: [6]MIDRANGE-L-request@xxxxxxxxxxxx Before posting,
please take a moment to review the archives at
[7]
http://archive.midrange.com/midrange-l.
-----
No virus found in this message.
Checked by AVG - [8]www.avg.com
Version: 2014.0.4765 / Virus Database: 4040/8433 - Release
Date: 10/22/14
References
Visible links
1. mailto:rich@xxxxxxxxx
2.
http://www.kisco.com/
3.
http://www.kisco.com/
4. mailto:MIDRANGE-L@xxxxxxxxxxxx
5.
http://lists.midrange.com/mailman/listinfo/midrange-l
6. mailto:MIDRANGE-L-request@xxxxxxxxxxxx
7.
http://archive.midrange.com/midrange-l
8.
http://www.avg.com/
midrange.com
