V6R1 info center shows default is on.
V7R1 info center show default is off.
Did the default change from V6R1 to V7R1, or could there be a typo in the center.
With Windows7 , can't use the recommended TELNET test to confirm the status.
"Normally you will have this enabled by default, but if you want to test if it is really enabled on your server you just have to telnet on the port your web server is running and request for "TRACE / HTTP/1.0" if you get a positive reply it means TRACE is enabled on your system.
Any recommendations on how to confirm.
-----Original Message-----
From: Steinmetz, Paul
Sent: Tuesday, January 14, 2014 4:19 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Possible iSeries HTTP vulnerabilties TRACE and/or TRACK methods
So even if TraceEnable is not in the httpconf file, by default it is off.
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Nadir Amra
Sent: Tuesday, January 14, 2014 3:35 PM
To: Midrange Systems Technical Discussion
Subject: Re: Possible iSeries HTTP vulnerabilties TRACE and/or TRACK methods
According to the InfoCenter directive reference, if not specified the default is
TraceEnable off
[1]
http://pic.dhe.ibm.com/infocenter/iseries/v7r1m0/index.jsp?topic=%2Frzaie%2Frzaiemod_core.htm
Nadir Amra
From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>,
Date: 01/14/2014 02:29 PM
Subject: Possible iSeries HTTP vulnerabilties TRACE and/or TRACK
methods
Sent by: midrange-l-bounces@xxxxxxxxxxxx
Security audit is requesting that these vulnerabilities be disabled.
Reviewing the httpd.conf config files, I see no evidence of TRACE and/or TRACK, so I'm assuming these are on by default, and need to be disabled by one of the suggested methods.
All of our HTTP instances are Apache 2.2.11(i5).
Am I correct that I need to re-visit every HTTP instance, adding one of the two recommendations below.
To disable
TraceEnabled Off
OR
...
# disable TRACE in the main scope of httpd.conf RewriteEngine On RewriteCond %{REQUEST_METHOD} ^TRACE RewriteRule .* - [F] ...
<VirtualHost www.example.com>
...
# disable TRACE in the www.example.com virtual host RewriteEngine On RewriteCond %{REQUEST_METHOD} ^TRACE RewriteRule .* - [F] </VirtualHost>
mod_rewrite must be active for these directives to be accepted. If mod_rewrite is not already active in your configuration:
Plugin Text: Synopsis: Debugging functions are enabled on the remote web
server.
Description: The remote web server supports the TRACE and/or TRACK
methods. TRACE and TRACK are HTTP methods that are used to debug web
server connections.
Solution: Disable these methods. Refer to the plugin output for more
information.
See Also:
http://www.cgisecurity.com/whitehat-mirror/WH-WhitePaper_XST_ebook.pdf
http://www.apacheweek.com/issues/03-01-24
http://download.oracle.com/sunalerts/1000718.1.html
Risk Factor: Medium
CVSS Base Score: 4.3
CVSS Vector: CVSS2#AV:N/AC:M/Au:N/C:P/I:N/A:N
CVSS Temporal Score: 3.9
CVSS Temporal Vector: CVSS2#E:F/RL:W/RC:C
Plugin Output:
To disable these methods, add the following lines for each virtual
host in your configuration file :
RewriteEngine on
RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
RewriteRule .* - [F]
Alternatively, note that Apache versions 1.3.34, 2.0.55, and 2.2
support disabling the TRACE method natively via the 'TraceEnable'
directive.
Nessus sent
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx
http://www.pencor.com/
midrange.com
