×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
Thank you all for the information
I got all the information I needed.
I knew the list would come thru
Thanks again
Dave
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Monday, July 22, 2013 2:01 PM
To: Midrange Systems Technical Discussion
Subject: Re: HMC question
You might want to read the topic "Cabling a model 9406-520, 9406-525, or
9407-515 and the Hardware Management Console (HMC)"
at
http://pic.dhe.ibm.com/infocenter/powersys/v3r1m5/topic/iphah_p5/e520.htm
And tell whomever said that it wasn't possible to RTFM.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "optional info0rmation" <ldwopt@xxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>,
Date: 07/22/2013 02:44 PM
Subject: HMC question
Sent by: midrange-l-bounces@xxxxxxxxxxxx
I am back with another question about a 9406 520
It is 9406 520 Feature code 7734. We were told that an HMC cannot hook up
to
this system.
Is that statement true?
If it can be is there anything special that has to be done?
Thanks
Dave Willenborg
FNTS
Omaha NE
midrange.com
