× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.




I was just looking at the specs: http://www-03.ibm.com/systems/power/hardware/720/specs.html

There are options to add 20 PCIe slots, 24 PCIx slots and 380 SFF disk slots. That's a whole lotta slots! :)

Joe,

I am not sure what you are reading, but from the words it means there are slots but not cards that come in the slots.

The Older Power5 boxes will have PCI-X adapters so you could have Twinax with an IOP. On the Power7 & Power6 machines there are no PCI-X slots in the CEC, and you can't have a IOP in the CEC. But by now I see very few needs to twinax. If you really need Twinax for printers, I put a 10Zig BosaNova box in, and run it over Ethernet.

Pete

--
Pete Massiello
iTech Solutions
http://www.itechsol.com
http://www.iInTheCloud.com





-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Joe Pluta
Sent: Sunday, April 14, 2013 11:51 AM
To: Midrange Systems Technical Discussion
Subject: Re: 9406 515 vs 8203 E4A

Pete, what's with all the optional PCIe/PCI-X slots on these boxes?
What are they used for?
I think the best reason is the 7.2 won't be supported on a 9406-515,
and the 8203-E4A would be the better of the two boxes, but not the
best box. In all honesty, I would look at a 8202-E4D (4-Core), as I
think it will be a better cheaper decision when you take the cost of
the hardware, software, and H/W maintenance over a 3 year life. SWMA
should be the same as all are P05

Pete

--
Pete Massiello
iTech Solutions
http://www.itechsol.com
http://www.iInTheCloud.com





-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Joe Wood
Sent: Thursday, April 11, 2013 7:06 PM
To: Midrange Systems Technical Discussion
Subject: Re: 9406 515 vs 8203 E4A

Tim,

Given these choices, I'd go with the 8203 as it's the Power6 chipset. It's usable and supported life will simply be longer than an aged Power5+...
Your options, CPW, and throughput with the Power6 will be superior (without picking apart CPU feature #'s).

Both are P05 software tier so the OS/LPP's (SWMA) will be the same. Both are V7R1 capable. Others can chime in with hardware MAINTENANCE considerations, reliability, and/or expand-ability ?

9406 515 withdrawn on Jan 1, 2009.
http://www-03.ibm.com/systems/power/hardware/systemi/515/

8203 E4A withdrawn on May 27, 2011.
http://www-01.ibm.com/common/ssi/cgi-bin/ssialias?infotype=dd&subtype=
sm&appname=pseries&htmlfid=897/ENUS8203-_h01








On Thu, Apr 11, 2013 at 2:57 PM, tim.dclinc@xxxxxxxxx
<tim.dclinc@xxxxxxxxx>wrote:

we are looking at these two systems to replace our older 170. I was
wondering which would be best and why. Also, with either run v7.1




As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.