× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



ok, thanks.

On Thu, Jan 17, 2013 at 2:43 PM, Jim Oberholtzer <
midrangel@xxxxxxxxxxxxxxxxx> wrote:

Which ever device is the system console, (system value = qconsole) is
the device it uses, without respect to the connectivity method of the
console, so in short, yes.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 1/17/2013 1:37 PM, Jack Kingsley wrote:
Jim, would this work whether it was a lan console/remote 5250 via HMC or
on
the HMC with access to the master console.

On Thu, Jan 17, 2013 at 2:34 PM, Jim Oberholtzer<
midrangel@xxxxxxxxxxxxxxxxx> wrote:

Jeff,

Sign off Interactive users does just that. It does not necessarily
result in a restricted state. You can get all of the subsystems to
stop
by using the "Subsystems to process" Option 9 from the control groups
menu (WRKCTLGBRM) but that will simply stop and optionally start the
subsystems you put in there. If you put *ALL in there it claims to
take
it to a restricted state and is intended for restricted state
operations
such as *SAVSYS save. If you do that remember to set the restart so
the control group will restart the controlling subsystem when it
ends.
I have not tried that specifically (all my comments are based on V7)

SBMJOB(*CONSOLE) will allow the system into a restricted state as
long
as the console monitor job has been started (Option 20 from the BRMS
menu). More importantly it will do it unattended while you sleep.
You
can also get a restricted state by submitting the back up job to the
controlling subsystem but I am not a big fan of that since you will
not
have any access to the console until the job finishes and restarts
everything.

You best option is SBMJOB(*CONSOLE) after starting the console job.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 1/17/2013 9:45 AM, Jeff Crosby wrote:
> What causes restricted state in BRMS? Is it SBMJOB(*CONSOLE)?
Or is it
if
> the BRMS control group says "Sign off interactive users . . . .
. . .
*YES?"
>
> For example, this statement in a job scheduler:
>
> STRBKUBRM CTLGRP(BLAHBLAH) SBMJOB(*CONSOLE)
>
> If BRMS control group BLAHBLAH says "Sign off interactive users
. . . .
. .
> . *NO" will restricted state be entered or not?
>
>
> -- Jeff Crosby VP Information Systems UniPro FoodService/Dilgard
P.O.
> Box 13369 Ft. Wayne, IN 46868-3369
260-422-7531www.dilgardfoods.com
> The opinions expressed are my own and not necessarily the
opinion of
> my company. Unless I say so.
> --
--
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.