× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Yes. I went into SST yesterday and changed it.

Paul Nelson
Office 512-392-2577
Cell 708-670-6978
nelsonp@xxxxxxxxxxxxx


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
Sent: Friday, February 17, 2012 10:39 AM
To: Midrange Systems Technical Discussion
Subject: Re: Operations Console Question

Just a silly question but you do have the QSECOFR profile password for
DST, right? If not you may be in for a real bad time.

To answer your question directly, I would change your plans. ( the
tavern is gonna come after the fun )

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 2/17/2012 10:17 AM, Roberto José Etcheverry Romero wrote:
No, that thinclient thingie was just a lan console, not an HMC.
You have to use the 65+21 functions to re-configure the lan console
and use a new pc to do it.
Power5 onwards have lan console built in. In this case, T5, the first
ethernet port can be used (you can use ANY port, but let's go with the
simple stuff).
I can't answer on the error codes 'cause i dont have the time right
now to look em up, but the C one is a temporary code, until it gets to
B or A, it's working, give it time.

Best Regards,



On Fri, Feb 17, 2012 at 1:05 PM, Paul Nelson<nelsonp@xxxxxxxxxxxxx>
wrote:
Silly customer scenario:
1. He let his hardware and software maintenance expire a while back.

2. He set up his 520 using a NeoWare thin client plugged into HMC port
1.

3. The NeoWare thin client hasn't worked for a couple of years.

4. He has no other console defined to the system

5. He doesn't have the Lan Console adapter card

6. It appears Ops Console is the only way to go, but he has no cable.

7. His operator was installing PTF's and rebooted the system.

8. He's getting a B6000901 link loader error booting on the B side.

9. Booting on the A side, he's getting a C600 432A message, which is a
big
question mark.

10. I'm supposed to leave in 30 minutes.


I don't think so, but can a regular serial cable be used to get Ops
Console
going? Should I change my plans?
Should I just head for the local tavern?

Any and all suggestions are welcome. Feel free to call my cell number.

Paul Nelson
Office 512-392-2577
Cell 708-670-6978
nelsonp@xxxxxxxxxxxxx



--

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.