×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
All of the prior suggestions are good, but it seems you don't know whether the problem is in the spool file, itself, or how it is being printed.
I have two suggestions:
Create both an old and a new 3 page spool file using the overlays and test data on your system. SAVOBJ the outq with SPLFDATA *YES and send it to an account that is having problems. They can quickly tell if the problem exists and you'll know whether to fix how it is being generated or how it is being printed. Both systems should be V5R4 or higher.
DUMPSTER from Gumbo software is either free or can be trialed for 30 days. It will let you find out what is actually in the spool files.
http://www.gumbo.com
Bill Scott
Océ North America, Inc.
Tel.: (561) 997-3256
e-mail: Bill.Scott@xxxxxxx
Bill Scott
Engineering Consultant IV | Software & Solutions Support | Océ North America, Inc.
5600 Broken Sound Blvd. Boca Raton, FL 33487
Tel.: (561) 997-3256 | Fax.: (561) 997-3205
e-mail: Bill.Scott@xxxxxxx
This message and attachment(s) are intended solely for use by the addressee and may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law.
If you are not the intended recipient or agent thereof responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify the sender immediately by telephone and with a 'reply' message.
Thank you for your co-operation.
midrange.com
