× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Sean,

Glad that message made sense to somebody...(note to self...no replies
monday morning before 2nd cup of coffee :)

it of course should have said

"But I believe I recall seeing that the Netserver in v4r4 is _NOT_
compatible with Windows 7."

Charles


On Mon, Jan 10, 2011 at 10:34 AM, Porterfield, Sean
<SPorterfield@xxxxxxxxxxxxxxxxxxxxxxx> wrote:
I didn't pay attention to the Win7 to V4R4 part.  Wasn't there a thread recently about Win7 access to network shares relating to the default security authentication method?  (Might have been a Win Server 2008 thread.)  I remember reading something, but I didn't really pay attention because it got resolved and did not affect me.  This might help the OP find something in the archives, though.  Sorry I couldn't be more help.
--
Sean Porterfield


-----Original Message-----
From: Charles Wilt

You can check the archives and perhaps google IBM's site...

But I don't believe I recall seeing that the Netserver in v4r4 is _NOT_ compatible with Windows 7.

Charles

On Fri, Jan 7, 2011 at 4:45 PM, Gary Kuznitz wrote:
I'm thinking this is an AS/400 problem now.

I ran a program called netscan that shows the network shares.  It
doesn't show any shares for 192.168.1.1.  Although this doesn't make
much sense since I have a Win7 PC that is shearing a folder in the IFS.

I have a different PC running XP Pro that was using the shared folder
Scans and it can't see the folder either.  Net use shows
\\ATU1277\Scans   is Unabailable

When I use Ops Nav, Network, Servers, TCP/IP it says:
AS/400 NetServer started.
File Systems, File Shares says:
Scans /SCANS
Access - Read/Write
No maximum number of users

The 400 is running v4r4
I have stopped NetServer and re-started it.
I have re-started the 400.

Does anyone know if "GO NETS" from QUSRTOOL/QATTINFO will compile in v4r4?

Any ideas are welcome.

Thanks,

Gary


On 7 Jan 2011 at 8:39, Gary (Gary Kuznitz <midrange-l@xxxxxxxxxxxx>)
commented about Re: "system error 5 has occurred" -:

Thank you for the reply...

On 7 Jan 2011 at 8:52, jim@xxxxxxx (jim@xxxxxxx
<midrange-l@xxxxxxxxxxxx>) commented about RE: "system error 5 has occurred" - Access is den:

I'd check to make sure that there isn't another share from this client to the AS/400 under a different username by running...

net use

Here is the output from mine...

U:\>net use
New connections will be remembered.


Status       Local     Remote                    Network

-------------------------------------------------------------------
------------ Disconnected I:        \\as09\download
Microsoft Windows Network Unavailable  R:
\\host.qlf.com\techstaff  Microsoft Windows Network OK           T:
\\dc06\it                 Microsoft Windows Network OK           U:
\\dc06\user\jsteil        Microsoft Windows Network Disconnected Z:
\\192.168.1.40\ConnectedPicklistSvc
                                                Microsoft Windows
Network Disconnected           \\bs10\harrisdata         Microsoft
Windows Network The command completed successfully.

The output from mine is:

Net use
New connections will be remembered.

There are no entries in the list.

Then I'd make sure there isn't a remembered password to this server by running:

rundll32.exe keymgr.dll, KRShowKeyMgr

From there you can clear out the remembered passwords.

The stored user names and passwords window came up with nothing in it.

I don't know that this will necessarily solve your problem, but it has helped me in the past when dealing with similar situations.

Anything might help at this point.  All suggestions are welcome.

Thanks,

Gary
    -Jim


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Gary Kuznitz
Sent: Friday, January 07, 2011 1:25 AM
To: Midrange Systems Technical Discussion
Subject: "system error 5 has occurred" - Access is denied. Net Use

net use L: \\ATU1277\scans MyPassword /user:SCANS

System error 5 has occurred.

Access is denied.

net view \\192.168.1.1
System error 5 has occurred.

Access is denied.

I'm trying to setup network shares on an XP Pro sp2 machine.  I had
sp3 installed and removed it because an IBM program wouldn't run in sp3.

I'm trying to share a folder called scans on an AS/400.  The AS/400
netshares is configured to share the folder with unlimited users.
The user allowed to share the folder on the AS/400 is called scans.  The user scans is created in XP Pro.

Both computers have the same user name called scans and the same password.

The user scans on the AS/400 is enabled.

Both computers are set with a workgroup called Workgroup.

In XP Pro the:

computer browser has been restarted.

Net Logon is not started and set to manual.

If I go into Windows Explorer, My Network Places, Entire Network,
Microsoft Windows Network, Workgroup, ATU1277

It asks me for a user name and a password.

If I put in user name:scans  password:MyPassword

The username/password screen comes right back.  Over and Over again

The firewall on the XP machine has TCP ports 137, 138, 139, 445 open.

The firewall on the XP machine has 192.168.1.1 Trusted.  This is
the machine called ATU1277.

I have "simple file sharing" un-checked.

I have also tried net use L: \\192.168.1.1\SCANS
/user:192.168.1.1\administrator

with the administrator password for the XP machine.

I have tried turning File and Printer Sharing for Microsoft Networks off, Ok, On, Ok.

Does anyone have any ideas what I might try next?

Thanks,

Gary Kuznitz
--

This email is confidential, intended only for the named recipient(s) above and may contain information that is privileged.  If you have received this message in error or are not the named recipient(s), please notify the sender immediately and delete this email message from your computer as any and all unauthorized distribution or use of this message is strictly prohibited.  Thank you.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.