RE: Can't get a remote console from home

I'll do that. I was thinking maybe the Windows firewall is on too,
causing my problem.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
CSeager@xxxxxxxxxxxxxx
Sent: Monday, December 13, 2010 11:44 AM
To: Midrange Systems Technical Discussion
Subject: RE: Can't get a remote console from home

Check your home antivirus/firewall to make sure that the port isn't
getting blocked at the PC level.







From: "Burns, Bryan" <Bryan_Burns@xxxxxxxxxxxx>
To: "Midrange Systems Technical Discussion"
<midrange-l@xxxxxxxxxxxx>
Date: 12/13/2010 10:54 AM
Subject: RE: Can't get a remote console from home
Sent by: midrange-l-bounces@xxxxxxxxxxxx



I have always used the IP address.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Tommy.Holden@xxxxxxxxxxxxxxxxxxxxx
Sent: Monday, December 13, 2010 9:20 AM
To: Midrange Systems Technical Discussion
Subject: Re: Can't get a remote console from home

Is your 5250 session configured to use the IP address of the HMC or the
actual system?

Thanks,
Tommy Holden



From: "Burns, Bryan" <Bryan_Burns@xxxxxxxxxxxx>
To: <MIDRANGE-L@xxxxxxxxxxxx>
Date: 12/13/2010 09:18 AM
Subject: Can't get a remote console from home
Sent by: midrange-l-bounces@xxxxxxxxxxxx



Yesterday I tried getting a remote console from my home and I kept
getting a timeout message. I was using a Cisco VPN and could ping the
HMC but I couldn't get a remote session. I could get a typical PC5250
port 21 session, just not the console using port 2300 and user Q#HMC.

I can get the console from my work desktop right now, so I believe I'm
using the right configuration and user name.