Lets Talk about Overlays

Alan, 2 things to check -

The spoolfile needs to be of type *AFPDS & you may need to mess with the rotation

Also, the printer needs to use host print transform.

See if this will get it going.

If not, you may need to look at the spool job (if the writer ends) to help determine the problem.

Thanks.

James Salter
American Cast Iron Pipe Company.

message: 7
date: Wed, 3 Dec 2008 16:45:50 -0500
from: Alan Shore <AlanShore@xxxxxxxx>
subject: Lets talk about Overlays


Afternoon everyone
I asked about overlays a couple of months ago, but I had to shelve that
project for a while.
However, I've been asked to open the project again
My problem is that I can download a spreadsheet (created in portrait
format) to the AS/400 and use it as an overlay.
However, the spreadsheet needs to be in landscape format, so when I save
the same spreadsheet as landscape, and download the new version (as a
different name) and use this new overlay, I cannot get the spool file to
print. It just sits in PND status.
If anyone has any ideas, or can point me in the (hopefully) right
direction, it would be MUCH appreciated

Thanks in advance



Alan Shore
Programmer/Analyst, Distribution
E:AShore@xxxxxxxxxxx
P:(631) 200-5019
C:(631) 880-8640
"If you're going through Hell, keep going" - Winston Churchill



_________Confidentiality Notice_______________________
This e-mail and any files transmitted with it is
confidential and is intended solely for the use of
the individual(s) or entity(ies) to whom this e-mail
is addressed. If you are not the intended recipient
or the person responsible for delivering the e-mail
to the intended recipient, be advised that you have
received this e-mail in error, and that any use,
disclosure, dissemination, forwarding, printing,
retention or copying of this e-mail is strictly
prohibited. If you have received this e-mail in
error, please immediately return this e-mail to
the sender and delete the e-mail from your system.
Thank you.