Redirecting messages in qsysopr

Greetings!

I have some messages in qsysopr that I would like to redirect to
another que. I have done that for some writer messages that were
filling up the QSYSOPR que, and now would like to do it for another
informational message we don't care too much about. The message
follows Any ideas are welcome.

This is the message;

Message ID . . . . . . : TCP2617 Severity . . . . . . . : 20
Message type . . . . . : Diagnostic
Date sent . . . . . . : 11/11/08 Time sent . . . . . . : 00:05:18

Message . . . . : TCP/IP connection to remote system 192.168.1.5 closed,
reason code 1.
Cause . . . . . : The TCP/IP connection to remote system 192.168.1.5 has
been closed. The connection was closed for reason code 1. Full connection
details for the closed connection include:
- local IP address is 192.168.1.5
- local port is 52992
- remote IP address is 192.168.1.5
- remote port is 5544
Reason codes and their meanings follow:
1 = TCP connection closed due to expiration of 10 minute FINWAIT2 timer.
2 = TCP connection closed due to R2 retry threshold being run.
3 = TCP connection closed due to keepalive timeout.
If TCPCNNMSG(*THRESHOLD) is defined for the Change TCP/IP Attributes (CHGTCPA)
command then there could be additional connections that have closed within
the threshold window. The number of additional TCP connections that have
closed is 0.
Recovery . . . : Informational message.