RE: power cords for model 525

[<franz400@xxxxxxxxxxxx>]

Thnks Joel, 
This is becoming clearer to me. Rack supplied by data center, and not IBM rack, making this more complicated. BP helping but was looking for my own understanding. 
jim
---- "Harvell wrote: 
> If the rack is like the one that I installed recently then they mean
> 220v power.  The Male end of the plug was indeed the twist and lock type
> plug, I can't remember what the electrical specs was.  The BP you bought
> the system from should be able to provide you the electrical
> requirements necessary for hookup.
>
>  
> Joel B. Harvell
> Food Lion, LLC
> (704) 633-8250 x2709
> jbharvell@xxxxxxxxxxxx
>
> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
> franz400@xxxxxxxxxxxx
> Sent: Friday, September 21, 2007 8:43 AM
> To: midrange-l@xxxxxxxxxxxx
> Subject: power cords for model 525
>
> I will admit absolute confusion over various volt and amp specs.
> The older systems (to me in US) were either 120 volt standard wall plug
> or 
> 208/240 big locking plug. 
> So the Info Center shows me plug & receptacle that say "250V 10 amp"
> type 26.
> The picture looks like a standard 3 prong power cord - what I called
> "120". 
> This is putting a 525 with redundant power supplies, and 595 expansion,
> both into a rack with a pdu, which then plugs to the data center floor
> connections. And they are 
> asking 110v or 220v ????
> Also, if each plug into pdu is 10A - do I need a total of 40A circuit
> ???
> No electrician to talk to, just sales...
> jim
> -- 
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
> **************************************************************************
> This electronic message may contain confidential or privileged information
> and is intended for the individual or entity named above.  If you are 
> not the intended recipient, be aware that any disclosure, copying, 
> distribution or use of the contents of this information is prohibited. 
> If you have received this electronic transmission in error, please notify 
> the sender immediately by using the e-mail address or by telephone
> (704-633-8250).
> **************************************************************************
>
> -- 
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.