RE: HMC Save Critical Console Data

You don't say.  :)  I posted that when it came out.  I don't have an
affected model and it's just one of our three HMCs, so no biggie. 


--
Justin C. Haase - iSeries System Engineer
IBM Certified Systems Expert - System i
Kingland Systems Corporation

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Thursday, September 07, 2006 10:12 AM
To: Midrange Systems Technical Discussion
Subject: RE: HMC Save Critical Console Data

Let me say that 6.1 is temporarily withdrawn.  Especially for certain
models of HMC.  Best to read the link about it.

Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





"Haase, Justin C." <justin.haase@xxxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
09/07/2006 10:05 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
cc

Subject
RE: HMC Save Critical Console Data






I'd load the fixes and try again - a scratch install and reconfig of
your HMC doesn't really take that long anyway - in the off chance that a
fix breaks something.  I do recall there being a problem with that
backup process that was addressed in a fix.  I've never had any backup
to DVD take more than 5-10 mins. 

Plus - I'm hard-core, running HMC 6.1 - WOOT!  No problems here.


--
Justin C. Haase - iSeries System Engineer
IBM Certified Systems Expert - System i
Kingland Systems Corporation

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
ChadB@xxxxxxxxxxxxxxxxxxxx
Sent: Thursday, September 07, 2006 8:52 AM
To: Midrange Systems Technical Discussion
Subject: HMC Save Critical Console Data


 Has anyone run into a problem where the Save Critical Console Data
function runs for a long time and seems to not complete?  I'm trying to
run an initial backup of our new HMC and the first 2 saves have behaved
this way (the first one (18hours+) was due to an unformatted DVD, but
the second one was freshly formatted from the HMC for backup/restore(I
ended it and rebooted at around 4 hours).  Support has suggested that I
load MH00695, MH00746, MH00688, and MH00822, but i'd really like to get
a backup completed before loading HMC fixes (which will also be a first
for me).

Any ideas on why the process might not be completing?  It gives the
following status:

Backup starting...
Generating the list of files to archive...
Number of files to archive is: 1541
Creating archive file...
Offloading archive file...

At this point the DVD drive light is blinking every so often.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.



CONFIDENTIALITY NOTICE:  This e-mail communication, including
attachments, 
is covered by the Electronic Communications Privacy Act, 18 U.S.C. 
2510-2521, is confidential, and may be legally privileged.  If you are
not 
the intended recipient or believe you received this communication in 
error, please reply to the sender indicating that fact and delete the
copy 
you received.  In addition, retention, dissemination, distribution, 
copying, or otherwise use of the information contained in this 
communication is strictly prohibited.  Thank you.